Jessica Rabbit Vibrators

Instructions for Use

Thank you for purchasing the Jessica Rabbit Vibrator. Designed for dual stimulation with independent rotating and vibrating functions, please read and follow these instructions carefully to ensure a safe, hygienic, and optimal experience.

Contents

• 1 x Jessica Rabbit Vibrator

• 1 x Battery Holder (Internal)

• (Note: Requires 4 x AA batteries, not included).

1. Battery Installation

This device is powered by 4 x AA batteries. Ensure they are installed correctly before your first use.

• Open the Compartment: Firmly grip the ABS plastic base of the toy and unscrew the bottom cap counter-clockwise to open the battery compartment.

• Insert Batteries: Remove the internal battery holder. Insert 4 x AA batteries into the holder, ensuring that the positive (+) and negative (-) ends match the polarity guides printed on the holder.

• Close Securely: Insert the loaded battery holder back into the handle and screw the bottom cap tightly back into place to ensure a secure connection.

2. Operating Instructions

This vibrator features independent controls for the rabbit ears (vibration) and the internal shaft (rotating beads), allowing you to completely customise your experience.

• Preparation & Lubrication: For the most comfortable experience, apply a generous amount of water-based lubricant to the shaft, the rabbit ears, and yourself before use.

  Important: Because the main shaft and ears are made of lifelike TPR material, do not use silicone-based lubricants, petroleum jelly, or lotions, as they will permanently degrade and ruin the material.

• Control Pad Interface: Locate the control pad on the ABS base. You will see dedicated buttons and light indicators for both the ears and the beads. The light indicators will illuminate to show you which setting you are currently on.

• Rabbit Ears (Clitoral Stimulation):

  • Press the On button designated for the rabbit ears to activate the vibration.

  • Give the corresponding Function button a short press to cycle through the different vibration patterns and speeds.

  • Press the On button again to deactivate the rabbit ears.

• Rotating Beads (Internal Stimulation):

  • Press the On button designated for the rotating beads to activate the shaft’s rotation.

  • Give the corresponding Function button a short press to cycle through the different rotating speeds and patterns.

  • Press the On button again to turn off the rotating beads.

3. Cleaning, Maintenance & Storage

• Preparation: Always ensure the device is turned off before cleaning.

• Cleaning the Shaft (TPR): Wash the upper TPR shaft and rabbit ears thoroughly with warm water and a mild, antibacterial soap, or a dedicated specialty toy cleaner.

• Cleaning the Base (ABS): The hard plastic base contains the control pad and battery compartment and is not waterproof. Wipe the handle clean using a damp cloth or an antibacterial wipe. Do not submerge the base or battery compartment in water.

• Drying: Pat the device completely dry with a clean, lint-free cloth or towel. Allow the TPR material to air-dry fully before storing.

• Storage: Store the device in a cool, dry, and dust-free environment away from direct sunlight.

  Maintenance Tip: Always remove the 4 x AA batteries if you are storing the vibrator for an extended period to prevent battery leakage and corrosion.

4. Safety Precautions

• Discontinue use immediately if you experience any pain, discomfort, or irritation.

• Do not use on areas that are swollen, inflamed, or have open skin lacerations.

• Keep the product out of reach of children and pets.

Important Safety Warnings for Your Jessica Rabbit Vibrator

To ensure a safe, hygienic, and highly satisfying experience with your Jessica Rabbit Vibrator, please read and strictly adhere to the following safety and care guidelines. This iconic device features a hybrid construction combining a rigid ABS plastic frame with a flexible, lifelike TPR (Thermoplastic Rubber) exterior. Because TPR requires specific chemical care and the device features a splashproof rating, protecting its materials and electronics is vital.

1. Lubricant Compatibility (Crucial for TPR)

• Water-Based Only: To ensure a smooth glide and protect the toy’s surface, always pair this vibrator with a high-quality water-based lubricant.

• Absolute Ban on Silicone and Oils: Never use silicone-based or oil-based lubricants (such as Vaseline, baby oil, or body lotions) under any circumstances. TPR is highly sensitive to chemical solvents. Silicone and oil will permanently dissolve the rubber polymers, causing the soft exterior of your vibrator to become permanently sticky, warped, structurally weakened, and completely unsafe for body contact.

2. Splashproof Boundaries & Water Safety (Critical)

• Splashproof Only: This device is rated as splashproof, not waterproof or fully submersible. It is built to handle a light wipe-down or accidental splashes, but it cannot withstand water pressure.

• Avoid Water Submersion: Never use this vibrator in the bath or under a heavy running shower. If water slips past the battery compartment cap, power buttons, or structural seams, it will cause an immediate internal short circuit, permanent motor failure, or a mild electric shock. Always ensure your hands and the toy’s base are completely dry before handling internal components.

3. Cleaning, Maintenance, and Hygiene

• Careful Washing Protocol: Clean the toy thoroughly immediately after every single use to prevent the buildup of bacteria.

• Washing Technique: Wash the flexible TPR shaft using warm water and a mild, unscented antibacterial soap or a purpose-made adult toy cleaner. Keep the device pointing downwards so water runs completely away from the control buttons and the base seam. Do not place the entire unit under a running tap.

• Porous Material Warning: TPR is a porous material containing microscopic pockets that can trap bodily fluids and environmental bacteria if not cleaned meticulously.

• Strictly Do Not Boil: Never clean this electronic item using boiling water, a microwave, or a dishwasher. Extreme heat will melt the internal seals, warp the ABS plastic, and destroy the motor. Dry thoroughly with a lint-free cloth.

4. Safe Storage & Material Isolation (Absolute Must)

• Keep Separated (Critical): Never store this vibrator directly touching other adult toys in your collection. TPR contains plasticizers that react aggressively when left in contact with silicone, PVC, or other TPE/TPR items. This triggers a chemical reaction that will permanently melt the toys into a fused, sticky, ruined mess.

• Environment: Store your completely dried vibrator isolated inside its original packaging or wrapped inside a clean, separate, breathable cloth pouch. Keep it in a cool, dry place out of direct sunlight and safely away from household pets or children.

5. Battery Care and Maintenance

• Correct Installation: If your device uses replaceable batteries, ensure they are inserted with the positive (+) and negative (-) ends strictly matching the internal markings. Tighten the base cap completely straight to ensure a proper splashproof seal.

• Prevent Battery Leakage: Never leave flat or dying batteries inside the handle. Dead batteries can leak toxic acid over time, which will permanently corrode the metal contacts, fry the circuitry, and present a chemical burn hazard. Remove the batteries entirely if the toy will be left unused for more than a few weeks.

6. Pre-Use Inspection

• Check for Surface Defects: Before each session, inspect the flexible TPR skin for any deep nicks, cracks, or signs of material degradation (such as a gooey or melting texture). Check the hard ABS plastic sections to ensure there are no sharp chips or cracks from accidental drops that could cause external skin pinches or lacerations. Turn the device on to verify the motors cycle smoothly before beginning play.