Tug Life Room Service Vibrating Male Masturbator

Important Safety Warnings for Your Tug Life Room Service Vibrating Male Masturbator

To ensure a safe, hygienic, and highly satisfying experience with your Tug Life Room Service Vibrating Male Masturbator, please read and strictly adhere to the following safety and care guidelines. This pocket-sized device features a lifelike, flexible TPE inner sleeve powered by a high-intensity, removable ABS plastic bullet vibrator. Proper physical and material care is vital to protect the sleeve and the internal battery-operated core.

1. First-Use Activation & Removable Bullet Mechanics

• Battery Connection Disc: The high-intensity ABS bullet vibrator comes with the 3 x LR44 button cell batteries included inside. Before your very first use, you must twist open the bullet casing and remove the white protective disc from the battery compartment. This disc acts as an insulation barrier during transit; the toy will not turn on until it is removed.

• Bullet Reassembly: Once the disc is removed, ensure the 3 x LR44 batteries are seated properly, and screw the bullet casing back together completely straight and tightly shut to prevent moisture from seeping into the contacts.

• Battery Maintenance: Never leave flat or dying batteries inside the ABS bullet. Button cell batteries can leak toxic acid over time, which will permanently destroy the vibrating circuitry and pose a chemical contact hazard. Remove the batteries entirely if the toy will be left unused for more than a few weeks.

2. Control Interface & Operation

• Powering On/Off: Press and hold the power button down firmly to turn the vibrations on or off.

• Changing Functions: Once the device is active, press the button again with a single short tap to seamlessly cycle through the different vibration functions and patterns.

3. Lubricant Compatibility (Crucial for TPE)

• Generous Water-Based Application: TPE (Thermoplastic Elastomer) mimics a lifelike texture but creates a high amount of surface friction when dry. You must apply plenty of high-quality water-based lubricant to yourself and directly into the sleeve before use. Insufficient lubrication can cause friction burns, painful skin chafing, or micro-tears in the material.

• Absolute Ban on Silicone and Oils: Never use silicone-based or oil-based lubricants (such as Vaseline, baby oil, or body lotions) under any circumstances. TPE is highly sensitive to chemical solvents; silicone and oil will permanently dissolve the material, causing the sleeve to become sticky, warped, structurally weakened, and completely unsafe for body contact.

4. Water Restrictions & Electrical Hazard

• Always Remove the Bullet Before Washing: The removable ABS bullet vibrator houses raw battery contacts and button cells, making it strictly non-waterproof and non-submersible.

• Avoid Water on the Bullet: Never rinse the bullet under a tap or submerge it in water. If water leaks into the battery compartment, it will instantly ruin the motor and short-circuit the cells. Clean the exterior of the ABS bullet by wiping it down carefully with a slightly damp antibacterial cloth.

5. Cleaning, Hygiene, and Porous Material Care

• Sleeve Cleaning Protocol: After every single use, completely slide the ABS bullet out of its housing. Wash the empty TPE sleeve thoroughly using warm water and a mild, unscented antibacterial soap or a purpose-made adult toy cleaner.

• Porous Material Warning: TPE is a porous material containing microscopic pockets that can trap bacteria and bodily fluids if not cleaned meticulously. Wash it immediately after use to maintain strict hygiene.

• Strictly Do Not Boil: Never use boiling water, microwaves, or a dishwasher to clean any part of this item. Extreme heat will warp or melt the TPE and destroy the electronic bullet.

• Natural Drying: Allow the TPE sleeve to air-dry naturally and completely before storing it away.

6. Safe Storage & Material Isolation (Critical)

• Keep Separated: Never store the TPE sleeve directly touching other adult toys in your collection. TPE contains plasticizers that react aggressively when left in contact with silicone, PVC, or other TPE items. This causes a chemical reaction that will permanently melt the toys into a fused, sticky mess.

• Environment: Store your dried sleeve and its bullet completely isolated inside a clean, separate, breathable cloth pouch. Keep it in a cool, dry place out of direct sunlight, away from radiators, and safely out of reach of children and pets.

7. Regular Inspection

• Check for Material Tears: Before each use, inspect the inner and outer surfaces of the TPE sleeve for any deep nicks, cracks, or material degradation. Discontinue use immediately if the TPE surface becomes permanently gooey, sticky, or split. Check the outer ABS plastic bullet to ensure it has no cracks from accidental drops that could pinch skin or let fluids seep into the battery chamber.