REV Thrusting Male Masturbator Instructions

Important Safety Warnings for Your Rev Thrusting Male Masturbator

To ensure a safe, hygienic, and highly satisfying experience with your Rev Thrusting Male Masturbator, please read and strictly adhere to the following safety and care guidelines. This high-performance device features an automated linear thrusting mechanism with 7 customizable functions, an ABS plastic handle, and a removable, body-safe TPR sleeve.

1. Control Interface & Thrusting Function

• Powering On/Off: Press and hold the primary power button (number 1) for 3 seconds to turn the motorized thrusting function on. To turn the device off completely, press and hold the power button again for 3 seconds until the mechanics stop.

• Cycling Pleasure Modes: Once the masturbator is active, give the power button a single short press to scroll through the 7 distinct thrusting functions. Always start on the lowest setting to let your body adapt to the physical movement.

2. Charging Protocol & Safety Lockout

• Initial Charge: You must charge your masturbator for at least 1 hour before your very first session. Always use the specific charging cable provided in the box.

• How to Connect: Insert the USB end of the provided cable into a standard charging wall plug (plug not provided), and insert the other end into the charging dock located at the bottom of the handle (number 2).

• Light Indicators: While actively charging, the integrated indicator light will flash on and off. Once the battery is fully charged, the light will stop flashing and remain steady.

• Safety Lockout Feature: For your absolute physical safety, you cannot use the Rev Thrusting Male Masturbator while it is charging. The internal mechanics will remain locked until the cable is completely unplugged.

3. Electrical & Water Safety Boundaries

• No Wet Charging: Make sure you do not charge the device when it is wet or near water. Exposing the charging dock at the bottom of the handle to moisture while connected to a live outlet creates a dangerous risk of a short circuit, permanent battery failure, or electric shock.

• Handle Casing Restrictions: While the inner sleeve is built to handle moisture and fluids, the rigid ABS plastic handle housing the buttons, circuit boards, and motorized tracks is non-submersible. Never drop the main handle into a bath or hold the entire motorized unit directly under a heavy running shower.

4. Lubricant Compatibility (Protecting the TPR Sleeve)

• Water-Based Only: For the best results, optimal comfort, and to prevent physical friction burns, always pair this device with a high-quality water-based lubricant. Apply it generously to yourself and to the inside of the sleeve before use.

• Absolute Ban on Oils and Silicone: Never use silicone-based or oil-based lubricants (such as Vaseline, baby oil, or body lotions). The sleeve is made from TPR (Thermoplastic Rubber), which will rapidly dissolve, warp, and become permanently sticky or structurally ruined if it comes into contact with incorrect chemical solvents.

5. Cleaning, Disinfecting, and Hygiene

• Pre-Use Hygiene: Before your first use, clean and disinfect the device. Carefully remove the Removable TPR Sleeve (number 3) from the rigid plastic outer housing and clean it with specialized toy cleaner or warm soapy water.

• Post-Use Washing: Thoroughly clean the sleeve immediately after every single session to prevent the accumulation of bodily fluids and bacteria.

• No Corrosive Cleaners: Do not use corrosive or harsh chemical cleaners (such as bleach, alcohol, or dish soap), as they will instantly degrade the porous TPR material. Carefully wipe down the outer and inner plastic handle casing with a damp antibacterial cloth, keeping water away from the electronics.

• Drying and Reassembly: Make sure the sleeve is completely dry before you carefully place it back in place. Always dry the TPR material naturally. Avoid contact with direct sunlight, as intense UV rays will rapidly break down the rubber polymers and ruin the texture. Never use extreme external heat sources like hair dryers, microwaves, or dishwashers.

6. Mechanical Thrusting Safety

• Do Not Jam the Motor: The internal mechanism relies on automated tracks to slide the sleeve back and forth. Allow the machine to thrust freely. Never apply excessive crushing pressure or grip the outer shell so tightly that the internal thrusting movement is completely jammed or forced to a halt. Forcing the motor to stall while turned on will strip the internal gears and cause rapid electrical overheating against your skin.

7. Safe Storage & Responsible Battery Disposal

• Cool, Dry Environment: Store your completely dried masturbator in a cool, dry place away from environmental moisture, dust, children, and pets. Do not store the TPR sleeve directly touching other adult toys, as different synthetic densities can chemically fuse together over time.

• Battery Disposal: Your device is powered by an internal lithium battery. When the product eventually reaches the end of its operational life, do not throw it into standard household waste. Please dispose of it responsibly at an official electronic recycling depot or battery collection point in accordance with your local environmental regulations.