Rev-Lite Squeezeable Male Masturbator

Name: Rev-Lite Squeezable Male Masturbator

SKU: N12801

Barcode: 5060211967269

UK Responsible Person: Loving Joy Limited

Address: Adur Business Centre, Little High Street
Shoreham-By-Sea, West Sussex, BN43 5EG

Contact: [email protected]

EU Responsible Person: Net1on1 Wholesale B.V. i.o

Address: Atoomweg 63, 3542 AA, Utrecht, Nederland

Contact: [email protected]

Instructions for Use

This model features a lifelike, intensely textured TPE internal sleeve housed inside an innovative ABS outer case. The case includes an integrated squeezable side, allowing you to manually compress the hard case to tightly grip your shaft for a highly customisable, realistic experience.

1. Preparation and Warming

Because the internal sleeve is made from premium TPE (Thermoplastic Elastomer), it mimics the soft texture of real skin and responds exceptionally well to temperature.

  • Cleaning Before Use: Remove the TPE sleeve from the ABS outer case and rinse the textured canal with warm water and an unperfumed anti-bacterial soap or a specialised sex toy cleaner.

  • Warming (Optional): To enhance the realism, soak the TPE sleeve in a bowl of warm (not boiling) water for 5 to 10 minutes before use. Always test the temperature against your inner wrist first to ensure it is comfortably warm, not hot.

2. Operation and Features

  • Lubrication: Apply a generous amount of water-based lubricant to yourself and directly down the 18.5 cm (7″) textured canal of the sleeve. Slide the sleeve back into the ABS outer case.

  • Using the Squeezable Case: Once inserted, use your fingers to press down on the squeezable side on the outside of the case. Squeezing this directly compresses the inner TPE sleeve against your shaft, allowing you to manually control the level of tightness, friction, and pressure with every stroke.

  • Vibration Feature: If you wish to add hands-free vibration, slide your favourite standard-sized bullet vibrator (not included) into the designated bullet pocket on the sleeve before closing the case.

3. Safe Usage Guidelines

  • Lubrication Warning (Crucial): TPE is a highly porous and sensitive material. You must only use high-quality water-based lubricant (lube). Using silicone-based lubricants, Vaseline, massage oils, or body lotions will trigger an irreversible chemical reaction that breaks down, melts, and permanently ruins the TPE sleeve.

  • Pressure Control: While the squeezable side is designed to add intense tightness, avoid squeezing it so forcefully that it causes discomfort or pinches the skin.

  • Hygiene First: Because TPE is porous, it has microscopic pockets that can harbour bacteria over time if not sanitized properly. To maintain optimal sexual health, ensure you wash the internal sleeve meticulously after every single use.

4. Cleaning, Maintenance, and Storage

TPE requires a specific aftercare routine to prevent the material from degrading, tearing, or becoming structurally sticky.

  • Post-Use Cleaning: Slide the TPE sleeve out of the ABS outer case. Flush the inside of the textured canal thoroughly under warm running water with an unperfumed anti-bacterial soap. Use your fingers to gently clean the deep internal ridges, taking care not to pull or stretch the material too forcefully. Wipe down the ABS outer case and its squeezable plate with a damp cloth if necessary.

  • Drying: Shake out any excess water from the sleeve. Stand the sleeve upright or prop it open in a well-ventilated area and allow it to air dry completely for at least 24 hours. Do not use direct heat sources like hair dryers or radiators, as extreme heat will melt TPE.

  • Renewing the Material (Important): Once the TPE sleeve is 100% dry, you will notice the surface feels sticky or tacky. This is a completely normal property of TPE. Dust the inside and outside of the sleeve lightly with a specialised toy renewing powder or unscented cornflour to absorb the tackiness and restore its smooth, velvety texture.

  • Storage: Once dusted, slide the sleeve back into the hard ABS case or store it inside a dedicated cloth pouch. Store the unit in a cool, dry place away from direct sunlight. Never let the loose TPE sleeve touch other sex toys in your collection (especially those made of silicone or PVC) as they can chemically react and melt together over time.

Important Safety Warnings for Your Rev-Lite Male Masturbator

To ensure a safe, hygienic, and long-lasting experience with your Rev-Lite Realistic Vagina Male Masturbator, please read and strictly adhere to the following safety guidelines. This product utilises a removable TPE (Thermoplastic Elastomer) inner sleeve housed within a rigid ABS plastic storage case, alongside a built-in bullet pocket and an end-cap air release valve. Both materials require specific handling to prevent tissue injury or product damage.

1. Material Characteristics and Hygiene (TPE Sleeve)

  • Porous Material: The realistic, ultra-soft inner sleeve is made from TPE. TPE is a porous material containing microscopic cavities that can harbor bacteria, sweat, and bodily fluids if not meticulously maintained.

  • Do Not Share: Because the inner textured canal cannot be 100% sterilized, this toy must strictly be used by one person only. Sharing a porous masturbator carries an exceptionally high risk of cross-contamination and transmitting Sexually Transmitted Infections (STIs).

2. Lubricant Compatibility (Crucial for TPE)

  • Water-Based Only: You must apply a generous amount of high-quality water-based lubricant directly into the textured canal and onto yourself before use.

  • Never Use Silicone or Oil: Do not use silicone-based or oil-based lubricants (such as Vaseline, baby oil, massage oils, or hand lotions) under any circumstances. These will chemically degrade the TPE, causing the soft sleeve to swell, warp, melt, or become permanently sticky and unusable.

3. Vacuum Pressure and the End-Cap Valve

  • Suction Adjustments: The hard outer case features an air release valve at the base. Placing your thumb over this hole creates a vacuum suction inside the chamber.

  • Avoid Tissue Trauma: Do not maintain an intense, unbroken vacuum suction for extended periods. Excessive suction or vigorous thrusting under heavy negative pressure can cause friction burns, skin pinching, or burst the tiny blood vessels (capillaries) on the surface of the skin, resulting in painful bruising. If the pressure feels too intense, immediately uncover the air valve to break the seal.

4. Bullet Pocket & Electrical Safety

  • Waterproofing Inspection: The sleeve is equipped with a dedicated pocket designed to hold a bullet vibrator. If you choose to upgrade your experience with a bullet, ensure the vibrator itself is fully waterproof before using it with liquid-based lubricants or washing the toy.

  • Remove Before Cleaning: Always remove any electronic bullet vibrators from the pocket before washing the TPE sleeve.

5. Cleaning, Drying, and Powdering (Highly Important)

  • Always Remove the Sleeve: After every session, fully slide the TPE sleeve out of the rigid ABS plastic outer case to wash it.

  • Washing: Flush the textured internal canal thoroughly under warm running water using an unscented, mild antibacterial soap or a purpose-made adult toy cleaner. Never boil the TPE sleeve or use boiling water, as extreme heat will melt and warp the material. Clean the hard ABS case separately by wiping it down.

  • Meticulous Drying: It is critical that the internal canal is completely dry before it is returned to the outer case. Prop the sleeve open in a well-ventilated area or use a cool-air fan. Trapping moisture inside the closed ABS case will rapidly lead to mould, mildew, and hazardous bacterial growth.

  • Renewing the Lifelike Texture: TPE naturally becomes tacky or sticky after being washed. Once the sleeve is entirely dry, lightly dust both the inside and outside with cornflour (cornstarch) or a specialized toy renewing powder to restore its velvety, skin-like feel.

6. Safe Storage

  • Keep Separated (Critical): Never store the TPE sleeve touching other silicone, TPE, TPR, or PVC items. The plastics will chemically react and fuse together into an unusable mess. Keep the sleeve resting safely inside its dry, designated ABS outer case.

  • Environment: Store in a cool, dry place out of direct sunlight and away from radiators. Keep well out of reach of household pets, as cats and dogs are naturally drawn to the scent and texture of TPE and may chew or swallow pieces, causing a fatal choking or intestinal hazard.

7. Regular Inspection and Disposal

  • Check for Fraying or Tears: Inspect the entry point and internal ridges of the sleeve regularly. If the TPE develops deep cracks, structural tears, permanent discolouration, or a persistent chemical odour, discard it immediately.

  • Disposal: Place the components securely wrapped in an opaque bag or newspaper inside your general household waste bin (your black bin). Because this is a hybrid product consisting of a rigid ABS shell and a flexible TPE sleeve, it cannot be recycled via standard UK roadside council recycling schemes.

By adhering to these comprehensive safety warnings, you can safely enjoy the highly realistic, vacuum-supported sensations of your Rev-Lite Masturbator.

Disposal Information

1. Material Identification: This product is constructed from two distinct materials. The rigid outer storage and travel case is made from hard ABS (Acrylonitrile Butadiene Styrene) plastic, while the soft, realistic inner textured sleeve is made from TPE (Thermoplastic Elastomer).

2. Cleaning & Disassembly:

  • Cleaning: Before disposal, ensure the product is thoroughly cleaned. Remove the TPE sleeve from the case and wash both components with warm water and a mild antibacterial soap or a specialised toy cleaner. Allow them to air dry completely. (Please note: Unlike silicone, TPE should never be boiled, as extreme heat will melt and permanently damage the material). * Disassembly: It is essential to fully separate the product before disposal by removing the flexible TPE sleeve entirely from the rigid ABS plastic case.

3. Disposal:

  • ABS Plastic Case: Hard ABS plastic is not accepted in standard council kerbside recycling bins alongside everyday household plastics. You can take the plastic case to your local Household Waste Recycling Centre (HWRC) to see if they have a dedicated “rigid/hard plastics” skip. If they do not, dispose of it in your general waste bin.

  • TPE Inner Sleeve: TPE is a porous material that is not accepted through standard council recycling schemes. The sleeve must be disposed of in your general household waste bin (usually your black bin). To maintain your privacy, ensure it is securely wrapped in an opaque bag or newspaper before throwing it away.

  • Specialised Recycling: Check if there are any specialised adult toy recycling programmes in the UK. Certain eco-conscious retailers and brands offer mail-in take-back schemes for intimate items, which may accept the TPE sleeve.

4. Packaging:

  • Cardboard Box: The outer cardboard packaging can easily be recycled with your regular council paper and cardboard collection.

  • Internal Packaging: Any internal plastic bags, blister trays, or protective wraps should be checked for recycling symbols. If accepted by your local council, place them in your plastics recycling bin; otherwise, dispose of them in your general waste.

5. Environmental Considerations: Always aim to minimise waste by considering the environmental impact. Due to the highly intimate nature of this product, donating or reselling the TPE sleeve is strictly prohibited for health and hygiene reasons. Properly separating the rigid plastic case from the soft sleeve ensures that the different material streams are disposed of safely and as responsibly as possible.

By following these instructions, you can help ensure that your Rev-Lite Realistic Male Masturbator is disposed of responsibly, minimising its environmental impact.

Disclaimer: All products placed on the market by Loving Joy Limited prior to December 13, 2024, remain marketable as they are governed by the provisions of the previous legislation.