Nauti Silicone Wand Vibrator

Name: Nauti Wand Ribbed Vibrator

SKU: N12256

Barcode: 5060211965838

UK Responsible Person: Loving Joy Limited

Address: Adur Business Centre, Little High Street
Shoreham-By-Sea, West Sussex, BN43 5EG

Contact: [email protected]

EU Responsible Person: Net1on1 Wholesale B.V. i.o

Address: Atoomweg 63, 3542 AA, Utrecht, Nederland

Contact: [email protected]

Instructions for Use

Thank you for purchasing the Nauti Silicone Vibrator. Please read and follow these instructions carefully to ensure a safe, hygienic, and optimal experience.

Contents

  • 1 x Nauti Silicone Vibrator (Made from premium Silicone & ABS plastic)

  • 1 x USB Pin-Hole Charging Cable

1. Charging Instructions

Your device is powered by a built-in lithium battery. Although it comes with a small amount of charge, we recommend charging it for at least 1 hour prior to your first use. Always use the charging cable provided.

  • Connecting the Charger: Locate the pin-hole charging port (indicated as 2 on your device layout). Insert the pin end of the provided USB cable securely into this hole.

  • Power Source: Plug the USB end of the cable into a standard USB charging plug or port. Leave the device to charge in a safe, dry place, away from direct sunlight.

  • Indicator: While the vibrator is charging, the light on the power button will pulse. Once it is fully charged, the light will stop pulsating and remain solidly lit.

  • Charging Safety: For safety reasons, the device’s functions are locked while plugged in, meaning you cannot turn on or use the vibrator while it is charging.

2. Operating Instructions

This vibrator features an intuitive up and down interface to easily navigate its 10 different speeds and functions.

  • Preparation & Lubrication: For the best results, apply a generous amount of water-based lubricant to the vibrator and yourself before use.

    Important: Do not use silicone-based lubricants, as they will chemically react with the silicone surface and permanently damage the material.

  • Power On: Press and hold either of the function/power buttons (indicated as 1 on your device) for 3 seconds to turn the device on. The power light will illuminate to signal it is active.

  • Changing Functions: Give the Up Arrow button a short press to cycle forward through the 10 different speeds and vibration patterns. If you wish to go back to a previous setting, simply press the Down Arrow button to reverse through the cycle.

  • Power Off: To turn the device off completely, press and hold either power/function button again for 3 seconds.

3. Cleaning, Maintenance & Storage

  • Cleaning: Ensure the device is turned off and completely disconnected from the charging cable. Clean the vibrator thoroughly after every use with warm, soapy water or a dedicated specialty toy cleaner.

  • Drying: Allow the device to dry naturally. Ensure it is completely dry before storing it away.

  • Storage: Store the device in a cool, dry place. Always avoid contact with direct sunlight and extreme heat.

4. Safety Precautions & Disposal

  • Discontinue use immediately if you experience any pain, discomfort, or irritation.

  • Do not use on areas that are swollen, inflamed, or have open skin lacerations.

  • Keep the product out of reach of children and pets.

  • Disposal: Your Nauti Silicone Vibrator is powered by a lithium battery. When the product reaches the end of its life, please dispose of it responsibly at a designated electronic waste recycling facility.

To ensure a safe, hygienic, and highly satisfying experience with your Nauti Silicone Vibrator, please read and strictly adhere to the following safety and care guidelines. This premium device features a body-safe silicone and ABS plastic construction, a dual-button bidirectional control interface with 10 speeds and functions, and an internal rechargeable lithium battery.

1. Control Interface & Bidirectional Function Navigation

Unlike basic single-button toys, this device features advanced up and down navigation buttons (numbered 1) for precise intensity control:

  • Powering On/Off: Press and hold either of the function/power buttons for 3 seconds. The integrated power light will illuminate to indicate the device is active. To turn the device off, press and hold either button again for 3 seconds.

  • Cycling Forward: Press the up arrow button to cycle forward through the 10 different speeds and vibration functions.

  • Cycling Backward: If a setting is too intense, press the down arrow button to step backward through the previous functions. This allows you to customize your pleasure without having to cycle through the entire loop.

2. USB Pin Charging Protocol & Safety Lockout

  • Initial Charge: Although your vibrator arrives with a small testing charge, it is highly recommended to charge it for at least 1 hour before your first official session.

  • How to Connect: Insert the pin end of the supplied USB cable into the pinhole port (numbered 2) on the device, and connect the USB end to a standard 5V adapter.

  • Safe Charging Environment: Always leave the device charging in a safe, dry place, completely away from direct sunlight.

  • Visual Indicators: While actively charging, the light on the power button will pulse on and off. Once the lithium battery is fully charged, the light will stop pulsating and stay solidly lit.

  • Safety Lockout Feature: For your absolute electrical and physical safety, the device is electronically locked while charging. You cannot turn on or use the vibrator while it is attached to the cable.

3. Lubricant Compatibility (Critical Silicone Alert)

  • Water-Based Only: For optimal comfort, a smooth glide, and to preserve the velvety skin of your toy, always pair it with a high-quality water-based lubricant.

  • Absolute Ban on Silicone: Do NOT use a silicone-based lubricant under any circumstances. Because the main body of the Nauti is made from premium silicone, a silicone lubricant will chemically bond with the toy’s surface. This will permanently dissolve, melt, and degrade the material, making it permanently sticky, warped, and unsafe for body contact. Avoid oil-based products (like baby oil or lotions) for the same reason.

4. Cleaning, Hygiene, and Water Safety

  • Post-Use Sanitation: Clean your vibrator thoroughly immediately after every single use to prevent the accumulation of bodily fluids and bacteria. Wash the exterior with specialized adult toy cleaner or warm, soapy water.

  • Handle with Care: Do not submerge the entire toy under heavy water pressure or drop it in a deep bath. While the silicone body is seamlessly sealed, the charging pinhole port (numbered 2) and button seams are vulnerable to water logging if fully drowned.

  • No Corrosive Agents: Never use harsh chemical solvents, alcohol, bleach, or boiling water to clean the toy, as this will destroy the premium silicone coating and compromise the internal electronics.

5. Natural Drying & Safe Storage

  • Avoid Sun Damage: After washing, always dry the toy naturally and avoid all contact with direct sunlight. Intense UV rays will rapidly break down the silicone polymers, fade the color, and warp the internal ABS plastic structure. Never use external heat sources like hair dryers or microwaves.

  • Material Isolation (Critical): Store your completely dried vibrator in a cool, dry place. Do not store it directly touching other silicone adult toys in your collection. Left in contact, different silicone densities will chemically react, bleed colors, and permanently melt into each other. Keep it isolated in its original box or a breathable cloth pouch.

6. Responsible Lithium Battery Disposal

  • Your Nauti Vibrator is powered by an internal, high-capacity lithium battery. When the product eventually reaches the end of its operational lifespan, do not throw it into standard household waste. Please protect the environment by disposing of the device responsibly at an official electronic waste recycling center or a local battery collection point.

Disposal Information

Thank you for choosing the Nauti Silicone Vibrator. When it comes time to dispose of this product, please follow these instructions to ensure environmentally responsible disposal in compliance with Waste Electrical and Electronic Equipment (WEEE) regulations and international waste management standards:

1. Battery Consideration: As noted in the instructions, your device is powered by an integrated, built-in rechargeable lithium battery. This battery is completely sealed inside the rigid ABS plastic core beneath the silicone skin to protect the internal electrical circuitry, dual-button interface (up/down arrow buttons), and pinhole charging port. Do not attempt to cut into the silicone or force open the internal housing to extract the battery yourself, as prying open a rechargeable lithium cell poses a severe chemical, short-circuit, and fire hazard.

2. Electronic Components & Battery Disposal (WEEE Compliance): Because this device contains an internal rechargeable lithium battery, an integrated pinhole charging port, control circuitry for the up and down function buttons, an LED power light, and internal vibration motors capable of cycling through 10 speeds and functions, it is fully classified as electronic waste. Under international environmental directives, this product must not be mixed with regular municipal rubbish or placed in standard domestic bin collections. Please take the entire vibrator to a local electronic waste recycling centre or an e-waste drop-off point at your civic amenity site, where the internal lithium battery and complex electrical parts can be safely separated and processed.

3. Silicone and ABS Plastic Outer Materials: This product is constructed from an internal ABS plastic structural shell covered by a premium, body-safe silicone outer layer.

  • Silicone Body: Because this component has been used intimately, it is strictly non-recyclable through standard municipal schemes. Ensure the vibrator has been thoroughly washed with warm soapy water or toy cleaner and dried naturally. If local recycling infrastructures require non-electronic structural elements to go into general waste after sorting, wrap the device securely in an opaque bag or newspaper to maintain your privacy before placing it into your general household rubbish bin.

  • ABS Plastic Housing: Standard regional domestic kerbside recycling streams do not accept hard, rigid ABS plastics mixed with daily household recyclables like plastic bottles. The specialized e-waste recycling centre is fully equipped to handle and separate these rigid plastic components from the internal electrical mechanics during processing.

4. Accessories & Charging Cable: The included USB pinhole charging cable contains copper wiring and a protective plastic coating. When it is no longer functional or needed, it should also be treated as electronic waste and deposited into your local e-waste recycling collection bin. Do not throw it away with your standard household trash.

5. Packaging & Gift Box Disposal: To recycle the specialized gift box packaging responsibly, the different materials must be separated before disposal according to your region’s infrastructure:

  • Cardboard Gift Box: The main rigid cardboard gift box and paper instruction manual can be collapsed flat and placed directly into your local paper and cardboard recycling stream.

  • Plastic Window: Carefully peel or cut the clear plastic viewing window away from the cardboard box structure. This thin plastic film should be disposed of in accordance with your local soft plastic recycling guidelines or placed in the general waste bin if mixed plastics are not accepted locally.

  • EVA Foam Insert: The protective EVA (Ethylene-Vinyl Acetate) foam insert used to hold the product securely in place is generally not accepted in standard kerbside recycling bins. Please check with your local recycling facility to see if they accept expanded foam materials; otherwise, it should be placed in your general household rubbish bin.

By following these steps, you help ensure that the Nauti Silicone Vibrator and all components of its gift box packaging are disposed of in an environmentally friendly and legally compliant manner. Thank you for your cooperation in protecting our planet.

Disclaimer: All products placed on the market by Loving Joy Limited prior to December 13, 2024, remain marketable as they are governed by the provisions of the previous legislation.