Loving Joy Vibrating Anal Beads
Name: Loving Joy 10 Function Vibrating Anal Beads
SKU: N11776
Barcode: 5060211964572
UK Responsible Person: Loving Joy Limited
Address: Adur Business Centre, Little High Street
Shoreham-By-Sea, West Sussex, BN43 5EG
Contact: [email protected]
EU Responsible Person: Net1on1 Wholesale B.V. i.o
Address: Atoomweg 63, 3542 AA, Utrecht, Nederland
Contact: [email protected]
Instructions for Use
Thank you for purchasing the Loving Joy 10 Function Vibrating Anal Beads. Please read and follow these instructions carefully to ensure a safe, hygienic, and optimal experience.
Contents
-
1 x Silicone Anal Beads (as shown in your reference file: image_3e6ac0.png)
-
1 x Removable ABS Bullet Vibrator
-
3 x LR44 Batteries (pre-installed inside the bullet)
-
1 x Quick-Start User Manual
-
(Note: The outer packaging is made from recyclable cardboard. Please recycle responsibly.)
1. Battery Activation (First Use)
Before your first use, you must activate the batteries housed inside the removable bullet vibrator.
-
Locate the Bullet: Gently slide the ABS bullet vibrator out of its flexible silicone holder at the base of the toy.
-
Open the Compartment: Unscrew the cap of the bullet vibrator.
-
Remove the Blocker: Take out the small white protective cap located inside. This is placed there during manufacturing to prevent the batteries from connecting and draining in transit.
-
Battery Check: Ensure the 3 x LR44 batteries remain stacked neatly inside and are facing the correct direction to connect.
-
Reassemble: Screw the cap firmly and tightly back onto the bullet. Slide the bullet back into the silicone holder.
2. Operating Instructions
-
Power On: Press and hold the power button on the end of the bullet vibrator for 3–5 seconds to turn the device on.
-
Changing Functions: Once the device is powered on, give the power button a short press to cycle through the 10 distinct vibration functions.
-
Power Off: Press and hold the power button again for 3–5 seconds to turn the vibrations off completely.
-
Lubrication (Crucial): For maximum comfort and safety, apply a generous amount of water-based lubricant to the product and yourself before use.
Important: Because the beads are made of premium silicone, do not use silicone-based lubricants, as they will permanently damage the material.
3. Cleaning, Maintenance & Storage
-
Preparation: Ensure the bullet vibrator is turned off. Remove the ABS bullet from the silicone base before cleaning.
-
Washing the Beads: The silicone beads can be washed thoroughly with warm water and a mild, antibacterial soap, or a dedicated toy cleaner.
-
Cleaning the Bullet: The ABS plastic bullet contains the electrical components and is not waterproof. Wipe it clean using a damp cloth or an antibacterial wipe. Do not submerge the bullet in water.
-
Drying & Storage: Pat both parts dry completely with a clean, lint-free cloth. Allow them to air-dry fully before reassembling. Store the device in a cool, dry, and dust-free place.
Maintenance Tip: If you are storing the toy for an extended period, remove the LR44 batteries from the bullet to prevent battery corrosion.
4. Safety Precautions
-
Flared Base Safety: Ensure the base containing the bullet vibrator remains outside the body at all times during use for safe and easy retrieval.
-
Discontinue use immediately if you experience any pain, discomfort, or irritation.
-
Do not use on areas that are swollen, inflamed, or have open skin lacerations.
-
Keep the product and the small LR44 batteries out of reach of children and pets.
Important Safety Warnings for Your Loving Joy 10-Function Vibrating Anal Beads
To ensure a safe, hygienic, and highly satisfying experience with your Loving Joy 10-Function Vibrating Anal Beads, please read and strictly adhere to the following safety guidelines. Because this item is designed specifically for anal play and features a removable, rigid ABS plastic bullet vibrator inside a flexible silicone bead harness, strict attention to hygiene, material care, and anatomical safety is vital.
1. Anal Safety, Sphincter Control & Retrieval (Critical)
-
The Retrieval Ring: The rectum creates a natural vacuum suction and can easily pull objects completely inside the body. This toy features a dedicated silicone pull-ring or flared base at the end of the chain. This retrieval mechanism must remain entirely outside the body at all times.
-
Graduated Insertion: Anal beads are designed for a sensation of sequential expansion and contraction as each bead passes through the sphincter. Relax your muscles and proceed slowly, inserting only one bead at a time. Never force the toy if you feel sharp pain or resistance.
-
Listen to Your Body: Anal play should never be painful. If you experience intense discomfort, throbbing, or any bleeding, stop immediately and gently withdraw the beads.
2. Battery Management & First-Use Activation
-
Transit Blocker Removal: Slide the bullet vibrator out of its silicone accommodation sleeve and unscrew the cap. You must remove the small white protective cap or paper disc located inside. This blocker is put in place during manufacturing solely to prevent the batteries from draining during transit.
-
Button Cell Discipline: The device requires 3 x LR44 button cell batteries (included). Ensure they remain stacked neatly inside, facing the correct direction, before screwing the cap back on tightly. Never leave flat batteries inside the bullet; they can leak toxic chemicals, permanently destroying the internal circuitry and creating a chemical burn hazard. Remove them entirely if the toy will be left unused for more than a few weeks.
3. Electrical & Waterproofing Safety (The Two-Part System)
-
The Removable Bullet: While the solid silicone bead exterior is completely waterproof, the removable ABS plastic bullet vibrator is strictly splashproof and non-submersible.
-
Avoid Water Submersion: Never submerge the bullet vibrator under water or use it in a bath. If water leaks past the screw threads of the bullet cap, it will instantly short-circuit the electronic motor, ruin the 10 functions, or cause a mild electric shock. Always ensure the bullet and your hands are completely dry before unscrewing the cap.
4. Lubricant Compatibility (Crucial for Anal Play)
-
Water-Based Only: Anal tissue does not self-lubricate. You must strictly use a generous amount of high-quality water-based lubricant on both your body and the silicone beads to ensure a smooth, friction-free insertion.
-
Never Use Silicone Lubes: Do not use silicone-based lubricants under any circumstances. Because the outer bead chain is made from premium silicone, a silicone lube will chemically react with it, permanently melting the smooth surface, making it sticky, degraded, and completely unusable.
-
Avoid Oils: Avoid oil-based products (such as Vaseline, baby oil, or coconut oil) as they degrade silicone over time and instantly destroy latex condoms.
5. Overheating and Motor Care
-
Interval Play: The compact bullet motor is engineered to cycle through 10 high-intensity functions. Running the motor continuously at high speeds for prolonged periods can cause heat to build up inside the sealed silicone sleeve. It is recommended to limit continuous use to 20 minutes per session. If the base begins to feel uncomfortably warm, turn the device off by pressing and holding the button for 3–5 seconds, and allow it to cool down completely.
6. Cleaning, Maintenance, and Hygiene (Absolute Biohazard Care)
-
Always Separate the Parts: Before cleaning, you must completely remove the ABS plastic bullet vibrator from the silicone bead attachment.
-
Washing Protocol:
-
Silicone Beads: Wash thoroughly with warm water and a mild, unscented antibacterial soap or a purpose-made adult toy cleaner. Because it is 100% silicone, you can sterilise the bead attachment by boiling it in a clean pot of water for 3–5 minutes (ensure the bullet is removed first!). Allow it to cool completely.
-
ABS Bullet: Wipe the bullet casing and button down carefully with a damp antibacterial cloth; do not submerge it or rinse it under a tap.
-
-
Strict Cross-Contamination Ban: Never move the beads directly from the anus to the vagina or mouth without a thorough antibacterial wash. Rectal bacteria (such as E. coli) introduced into the vagina can cause severe health complications, including Pelvic Inflammatory Disease (PID), Bacterial Vaginosis (BV), or severe urinary tract infections.
7. Safe Storage and Cardboard Packaging Care
-
Keep Separated (Critical): Never store the silicone beads directly touching other silicone toys. Left in direct contact, different silicone densities will chemically react and permanently melt into each other. Store your dried beads and bullet inside a clean, separate, breathable cloth pouch.
-
Cardboard Box Preservation: Your product packaging is made from cardboard. While excellent for keeping the toy away from dust and sunlight, do not store the cardboard box in a damp or humid environment (such as a bathroom cupboard). Environmental moisture will cause the cardboard to warp, degrade, and encourage the growth of environmental mould or mildew, which can easily transfer to your toy. Keep the box in a cool, dry wardrobe or drawer.
8. Regular Inspection
-
Check the Connecting Spine: Before each use, gently tug the bead chain and carefully inspect the narrow flexible silicone joints connecting each bead to the next. Look for any micro-tears, stretching, or hairline splits. Because this item is under physical tension during removal, a compromised spine can snap during extraction, leaving detached beads trapped inside the rectum—this constitutes a severe medical emergency requiring immediate hospital surgical intervention. Verify the bullet powers on and cycles through its 10 modes correctly before use.
Disposal Information
Thank you for choosing the Loving Joy 10 Function Vibrating Anal Beads. When it comes time to dispose of this product, please follow these instructions to ensure environmentally responsible disposal in compliance with Waste Electrical and Electronic Equipment (WEEE) regulations and international waste management standards:
1. Battery Removal: Before disposing of the product, you must remove the batteries. Separate the bullet vibrator from the silicone anal beads attachment, twist and unscrew the cap of the ABS plastic bullet, and slide out the 3 x LR44 button cell batteries. Never leave batteries inside a device intended for disposal, as they can leak, corrode, or pose a fire hazard.
2. Battery Disposal: Button cell batteries must not be disposed of in your regular household waste bin. Please take the 3 x LR44 batteries to a designated battery recycling point. These dedicated collection boxes are widely available at local supermarkets, electronic retail stores, and civic amenity or recycling sites worldwide.
3. Electronic Components (WEEE Compliance): The internal motor, micro-circuitry, and housing of the removable ABS plastic bullet vibrator are classified as electronic waste. Under international environmental directives, this component must not be thrown away with regular trash or placed in standard municipal household bins. Please take the separated bullet mechanism to a local electronic waste recycling centre or a dedicated e-waste drop-off facility, where the electrical components can be safely processed.
4. Silicone and Plastic Outer Materials: This product is composed of a rigid ABS plastic bullet and a flexible, body-safe silicone bead attachment.
-
Silicone Anal Beads: Because this component has been used intimately and design-wise for anal play, it is strictly non-recyclable through standard municipal schemes. Wash it thoroughly with warm water and a mild antibacterial soap, allow it to dry, and wrap it securely in an opaque bag or newspaper to maintain your privacy before placing it into your general household rubbish bin.
-
ABS Plastic Housing: Standard domestic kerbside recycling schemes do not accept hard, rigid ABS plastic mixed with daily household recyclables. The e-waste recycling centre is equipped to process the plastic bullet casing along with the electrical components.
5. Packaging: Since the original box is made from cardboard, it is highly sustainable and easy to recycle:
-
Cardboard Box: Collapse the box flat and place it directly into your local paper and cardboard recycling stream.
-
Internal Packaging: If there are any internal plastic trays, wrappers, or the small white battery blocker cap remaining, check them for regional recycling symbols and dispose of them according to your local plastic recycling infrastructure.
By following these steps, you help ensure that the Loving Joy 10 Function Vibrating Anal Beads are disposed of in an environmentally friendly and legally compliant manner. Thank you for your cooperation in protecting our planet.
Disclaimer: All products placed on the market by Loving Joy Limited prior to December 13, 2024, remain marketable as they are governed by the provisions of the previous legislation.