Loving Joy Rechargeable Cock Ring Info
Name: Loving Joy Rechargeable Silicone Vibrating Cock Ring
SKU: N11161
Barcode: 5060211962943
UK Responsible Person: Loving Joy Limited
Address: Adur Business Centre, Little High Street
Shoreham-By-Sea, West Sussex, BN43 5EG
Contact: [email protected]
EU Responsible Person: Net1on1 Wholesale B.V. i.o
Address: Atoomweg 63, 3542 AA, Utrecht, Nederland
Contact: [email protected]
Instructions for Use
Thank you for purchasing the Loving Joy Rechargeable Cock Ring. Please read and follow these instructions carefully to ensure a safe, hygienic, and optimal experience.
Contents
-
1 x Loving Joy Rechargeable Cock Ring
-
1 x USB Pin-Hole Charging Cable
Charging Instructions
-
Preparation: As this device is USB rechargeable, ensure it is fully charged before your first use for maximum power.
-
Connecting the Charger: Locate the small charging hole on the back of the product. Push the pin-hole charging cable firmly through this hole until it connects. (Note: The charging port is designed to create a watertight seal, so you may need to apply gentle pressure to push the pin through the silicone opening.)
-
Power Source: Plug the USB end into a standard standard 5V power source, such as a USB charging station, computer port, or mains adaptor.
-
LED Indicator: A light indicator will flash to show the device is charging. Once the light becomes solid or turns off entirely, the cock ring is fully charged and ready to use.
Operating Instructions
The vibrations are controlled by the single power button located on the front of the main body.
-
Power On: Press and hold the power button for 2–3 seconds until the vibrations begin.
-
Mode Selection: Once the toy is powered on, give the power button a short press to cycle through the 10 distinct vibration settings (which include 3 constant speeds and 7 pulsating functions).
-
Power Off: Press and hold the power button again for 2–3 seconds until the motor completely stops.
-
Lubricant Guide (Crucial): Always apply a generous amount of water-based lubricant to the product and yourself before use to assist with a comfortable fit.
Important: Because this ring is made of premium silicone, do not use silicone-based lubricants, as they will chemically react with the surface and permanently damage the material.
Cleaning, Maintenance & Storage
-
Preparation: Ensure the device is turned off and completely disconnected from the charging cable before cleaning.
-
Washing: Wash the silicone and ABS surfaces thoroughly with warm water and a mild, antibacterial soap, or a dedicated specialty toy cleaner.
-
Drying: Pat dry completely with a clean, lint-free cloth or towel. Allow it to air-dry fully before storing.
-
Storage: Store the device in a cool, dry, and dust-free place. Keep it away from direct sunlight, extreme heat, and other toys made of different materials (to prevent reactions).
Safety Precautions
-
Time Limit: For safety, do not wear any constriction ring for longer than 30 minutes at a time. Allow ample time for normal circulation to resume between uses.
-
Discontinue use and remove the ring immediately if you experience pain, numbness, discoloration, or severe discomfort.
-
Do not fall asleep while wearing the device.
-
Never operate the device while it is connected to the charger.
-
Keep the product out of reach of children and pets.
Specifications
-
Material: Premium Body-Safe Silicone & ABS Plastic
-
Charging Type: USB Pin-Hole DC Cable
-
Functions: 10 Vibration Modes (3 Speeds, 7 Patterns)
Warranty and Support
For troubleshooting, warranty details, or any questions regarding your Loving Joy Rechargeable Cock Ring, please refer to the documentation included in your packaging or contact our customer support team directly.
Important Safety Warnings for Your Loving Joy Rechargeable Cock Ring
To ensure a safe, comfortable, and stamina-enhancing experience with your Loving Joy Rechargeable Cock Ring, please read and strictly adhere to the following safety guidelines. Because this device integrates a multi-speed electronic motor and a rechargeable lithium-ion battery directly into an elastic silicone ring structure, proper physical and electrical care is vital.
1. Wear Time Limits and Circulation (The 30-Minute Rule)
-
Strict Time Limit: Never wear the cock ring for longer than 30 minutes at a time. Constriction rings work by restricting blood flow to maintain firmness. Leaving the device on for longer than 30 minutes starves the delicate penile tissue of fresh oxygenated blood, which can cause permanent nerve damage, severe tissue bruising, erectile dysfunction, or priapism (a prolonged, painful erection requiring emergency medical care).
-
Remove Immediately If: If you or your partner notice any extreme bruising, coldness to the touch, deep purple or blue discolouration, sudden throbbing pain, or a complete loss of sensation, remove the ring immediately.
-
Do Not Sleep: Never fall asleep while wearing this product. Losing consciousness while blood flow is restricted can cause catastrophic injury.
2. Charging and Battery Safety
-
Correct Charging Procedure: Locate the small pinhole charging port on the back of the product. Push the pin-hole charging cable firmly through this hole until it connects, and plug the USB end into a standard power source.
-
Adapter Restrictions: Only use standard, high-quality USB wall adapters (5V, 1A or 2A). Never use “fast-chargers” or rapid-charging smartphone blocks, as these deliver an excessive voltage that can permanently fry the internal circuit board, cause the lithium battery to swell, or create a severe fire hazard.
-
Unplug When Full: Unplug the cable immediately once the flashing light becomes solid or turns off. Never operate the cock ring whilst it is connected to the charging cable.
3. Electrical & Waterproofing Safety (Critical)
-
Pinhole Port is Splashproof Only: While the seamless silicone body offers excellent external protection, the pinhole charging port on the back is only splashproof, not fully waterproof or submersible.
-
Avoid Water Submersion: Never submerge this device in a bath or use it under a heavy running shower. If water slips past the self-healing pinhole seal into the internal electronics, it can cause a short circuit, rapid battery overheating, or a mild electric shock. Always ensure the charging pin and the port area are completely dry before connecting the charger.
4. Lubricant Compatibility (Crucial for Silicone Rings)
-
Water-Based Only: You must strictly use a high-quality water-based lubricant to aid application, comfort, and removal.
-
Never Use Silicone Lubes: Do not use silicone-based lubricants under any circumstances. Because the flexible ring structure is made from 100% silicone, a silicone-based lube will chemically react with it, permanently melting the material, making it sticky, degraded, and completely unusable.
-
Avoid Oils: Avoid oil-based products (such as Vaseline, baby oil, or body lotions) as they will quickly degrade the silicone’s structural integrity and break down latex condoms.
5. Sizing, Placement, and Genital Safety
-
Pinch and Friction Hazard: Genital skin is thin and easily trapped. Use a generous amount of water-based lubricant during application to avoid pulling pubic hairs or painfully pinching skin folds.
-
Correct Placement: This ring is designed to be worn around the base of the erect penis, or around both the penis and testicles, keeping the ABS plastic control button facing outwards on the front. Never place the ring solely around the scrotum or testicles, as this can trap them and cause severe injury.
6. Overheating and Motor Care
-
Interval Play: The internal motor cycles through 10 distinct vibration settings (3 constant speeds and 7 pulsating functions). Running the motor continuously at maximum strength can cause heat to build up inside the sealed casing. Limit continuous motorised use to 20 minutes per session to prevent the ABS housing from becoming uncomfortably warm against sensitive skin.
7. Cleaning, Maintenance, and Hygiene
-
Careful Washing: Wash the toy thoroughly immediately after every single use. Keep the ring horizontal or point the front button downwards so water runs away from the back charging hole. Wash the silicone ring loops using warm water and a mild, unscented antibacterial soap or a purpose-made adult toy cleaner.
-
Do Not Submerge: Wipe the ABS plastic casing area carefully with a damp cloth; do not submerge the electronic housing under water or place it directly under a running tap.
-
No Extreme Heat: Never use boiling water, microwaves, or dishwashers to clean this electronic item, as extreme heat will melt the internal seals and destroy the lithium battery. Dry thoroughly before storing.
8. Safe Storage
-
Keep Separated (Critical): Never store this device directly touching other silicone toys. Left in contact, the different silicone items will chemically react and permanently melt into each other. Store your cock ring inside its original box or wrapped inside a clean, separate, breathable cloth pouch in a cool, dry place.
9. Emergency Removal Protocol
-
Difficulty Removing: If the ring becomes trapped due to unexpected swelling or an intense erection, do not panic. Apply ice packs or take a cold shower to naturally reduce the erection and shrink the tissue. Use a generous amount of liquid soap, shower gel, or water-based lubricant to carefully slide the ring off.
-
Seek Emergency Medical Help: If you cannot remove the ring after trying cold water and lubrication, or if your genitals become intensely painful and discoloured, go immediately to your nearest hospital A&E (Accident & Emergency) department.
10. Regular Inspection
-
Check for Structural Tears: Before each use, gently stretch the silicone ring loops and inspect them for any hairline cracks, nicks, or small tears. Because this item is under high physical tension when worn, a small nick can cause the silicone to snap violently during use, resulting in painful snapped-skin injuries. Discard the toy immediately if any structural damage is found.
Disposal Information
Thank you for choosing the Loving Joy Rechargeable Cock Ring. When it comes time to dispose of this product, please follow these instructions to ensure environmentally responsible disposal in compliance with Waste Electrical and Electronic Equipment (WEEE) regulations and international waste management standards:
1. Battery Consideration: This cock ring features an integrated, built-in lithium-ion rechargeable battery sealed securely inside the main ABS body. Do not attempt to force open the rigid plastic casing or cut into the silicone ring to remove the battery yourself. Puncturing or forcing open a rechargeable lithium battery can cause short-circuiting, cell damage, or a potential fire hazard.
2. Electronic Components & Battery Disposal (WEEE Compliance): Because this device features an integrated rechargeable battery, micro-wiring, and an internal motor, it is fully classified as electronic waste. Under international environmental directives, this product must not be mixed with regular municipal rubbish or placed in standard domestic bin collections. Please take the entire rechargeable cock ring to a local electronic waste recycling centre or an e-waste drop-off point at your civic amenity site, where the internal lithium battery and electrical parts can be extracted and processed safely.
3. Silicone and Plastic Outer Materials: The structural body of this product is crafted from a combination of soft silicone and a rigid ABS plastic control housing.
-
Most standard local domestic recycling schemes do not accept hard ABS plastic or silicone alongside daily household recyclables.
-
The e-waste recycling centre is equipped to handle these integrated material layers during processing. However, if local regulations require the non-electronic structural remnants to be placed in general waste, please ensure the device is thoroughly washed, dried, and securely wrapped in an opaque bag or newspaper to maintain your privacy before putting it in your household rubbish bin.
4. Accessories & Charging Cable: The included USB pin-hole charging cable contains copper wiring and a protective plastic coating. When you no longer need the cable, it should also be treated as electronic waste and disposed of alongside the cock ring in your local e-waste recycling collection bin.
5. Packaging: If you still have the original packaging, please recycle it responsibly according to your region’s infrastructure:
-
Cardboard Box/Sleeve: This can be folded down flat and placed directly into your local paper and cardboard recycling stream.
-
Internal Packaging: Check any internal plastic trays, bags, or protective wraps for regional recycling symbols and dispose of them according to your local plastic recycling guidelines.
By following these steps, you help ensure that the Loving Joy Rechargeable Cock Ring is disposed of in an environmentally friendly and legally compliant manner. Thank you for your cooperation in protecting our planet.
Disclaimer: All products placed on the market by Loving Joy Limited prior to December 13, 2024, remain marketable as they are governed by the provisions of the previous legislation.