Loving Joy Double Penetration Cock Rings

Name: Loving Joy Double Penetration Strap On Vibrator

SKU: N12315

Barcode: 5060211966132

Name: Loving Joy Double Fun Vibrating Rabbit Double Penetration Strap-On

SKU: N12314

Barcode: 5060211966149

UK Responsible Person: Loving Joy Limited

Address: Adur Business Centre, Little High Street
Shoreham-By-Sea, West Sussex, BN43 5EG

Contact: [email protected]

EU Responsible Person: Net1on1 Wholesale B.V. i.o

Address: Atoomweg 63, 3542 AA, Utrecht, Nederland

Contact: [email protected]

Instructions for Use

Thank you for purchasing a Loving Joy Double Penetrator. Please follow these instructions to ensure the safe, optimal, and effective use of your product.

This instruction guide covers both products in the range. Both models feature an internal insertable shaft paired with an external insertable shaft/stimulator made from velvety-soft silicone, powered by a high-intensity, removable silver bullet vibrator.

The Two Configurations

  • 1. Loving Joy Double Penetration Strap-On Vibrator (Blue/Purple): Features a main insertable shaft, an angled anal/vaginal secondary shaft, and an integrated, stretchy cock and ball ring base to anchor the toy snugly against the wearer’s body.

  • 2. Loving Joy Double Fun Vibrating Rabbit Double Penetration Strap-On (Black): Features a main insertable shaft, an angled secondary shaft, and a single anchoring ring topped with flexible rabbit ears designed for external clitoral stimulation.

Contents

  • 1 x Loving Joy Silicone Double Penetrator Attachment (with integrated support ring/ears)

  • 1 x Removable Single-Speed Silver Bullet Vibrator

  • 3 x LR44 Button Cell Batteries (Pre-installed inside the bullet)

Battery Activation Instructions (First-Time Use)

Your device comes equipped with 3 x LR44 button cell batteries pre-installed inside the bullet. Before your very first session, you must remove the transit insulator to activate the power.

  1. Extract the Bullet: Locate the silver bullet vibrator seated within the silicone base pocket or clitoral attachment. Gently slide or pop it out of its flexible holder.

  2. Open the Chamber: Ensure your hands and the toy are completely dry. Firmly hold the bullet body and unscrew the end cap (the end with the power button) anti-clockwise.

  3. Remove the Insulator Blocker: Take out the small white protective paper disc or plastic cap inside the chamber. This blocker is strictly in place to stop the batteries from connecting and draining during transit.

  4. Check Battery Alignment: If the 3 x LR44 button cell batteries slip out while removing the blocker, simply stack them back inside the chamber sequentially, ensuring they are all facing the correct direction as per the internal markings.

  5. Seal and Reassemble: Screw the end cap back on clockwise until it is tight and flush. Slide the activated silver bullet firmly back into its silicone holder pocket on the toy.

Operating Instructions

Engineered for thrilling double penetration, these toys allow a single user to enjoy simultaneous vaginal and anal stimulation, or couples to share a uniquely connected strap-on experience without needing a full fabric harness.

  1. Power On/Off: Press and hold the button on the flat end of the silver bullet for 3 to 5 seconds to initiate the vibration. To turn the device off, press and hold the button down again for 3 to 5 seconds until the motor stops completely.

  2. Vibration Profile: This premium bullet operates on a single, continuous, deep rumbling speed designed to deliver intense, uninterrupted resonance through both silicone shafts simultaneously.

  3. Lubrication (Essential): Double penetration requires an abundance of lubricant. Apply a very generous layer of water-based lubricant to both insertable shafts and your body (or your partner’s body) before insertion.

  4. Fitting and Positioning: * For the Blue/Purple Cock & Ball Ring model: Carefully stretch the integrated silicone rings to feed your penis and/or testicles through, anchoring the main dildo shaft firmly at your base. Guide the secondary shaft into your partner’s vacant canal during intercourse.

    • For the Black Rabbit model: Wrap or slide the anchoring ring into position, ensuring the main shaft is inserted internally while the secondary shaft or the external rabbit ears press firmly against the clitoris.

  5. Customisation: The bullet vibrator is completely removable. It can be taken out at any time to be used independently as a handheld clitoral stimulator, or swapped out entirely and replaced with any other standard-sized bullet vibrator from your collection.

Cleaning, Maintenance, and Waterproofing

  1. Isolate Before Cleaning: Always slide the silver electronic bullet completely out of its silicone pocket before introducing water.

  2. Washing the Silicone Body: Wash the dual-shaft silicone attachment thoroughly under warm running water using a mild, unperfumed anti-bacterial soap or a specialised sex toy cleaner.

  3. Cleaning the Bullet: Wipe down the rigid ABS plastic silver bullet carefully with a damp cloth or a targeted antibacterial toy spray.

    • > Waterproofing Note: While the heavy-duty silicone body is 100% waterproof, the removable silver electronic bullet is not submersible. Never submerge the bullet or hold it under heavy running water, as moisture crossing the screw cap threads will permanently corrode the button cell contacts.

  4. Drying & Storage: Thoroughly dry all components with a lint-free towel. Once 100% dry, reassemble the bullet into the toy. Store in a cool, dry place inside a cloth pouch or its original packaging.

Safety Precautions & Constriction Care

  • ONLY use water-based lubricant. Because the main body of these toys is crafted from premium silicone, using silicone-based lubricants, massage oils, or Vaseline will cause an irreversible chemical reaction that softens, breaks down, and permanently melts the material.

  • The 20-30 Minute Ring Limit: If you are using the Blue/Purple model with the constriction ring over the penis and scrotum, never wear the toy for longer than 20 to 30 minutes per session to maintain healthy blood flow. Remove immediately if you experience any numbness, coldness, or skin discolouration.

  • Battery Maintenance: If you do not intend to use the toy for several weeks, open the bullet cap and remove the button cell batteries. Batteries left inside long-term can leak or corrode, permanently ruining the internal contact springs.

  • Keep out of reach of children and household pets.

Customer Support

If you have any questions, troubleshooting issues, or concerns regarding your Loving Joy Double Penetrator, please reach out directly to our dedicated customer service team. We are here to support you as best as possible to ensure you get the most out of your experience!

Enjoy your customisable, mind-blowing experience with the Loving Joy Double Penetrator!

Important Safety Warnings for Your Loving Joy Double Penetrator Strap-On Range

To ensure a safe, hygienic, and highly satisfying experience with your Loving Joy Double Penetrator (whether you are using the Double Penetration Strap-On Vibrator with Cock & Ball Ring or the Double Fun Vibrating Rabbit Double Penetration Strap-On), please read and strictly adhere to the following safety guidelines. Because these advanced double-penetration toys utilise a multi-shaft design, an integrated constriction or positioning ring, and a removable ABS plastic button-cell bullet vibrator, precise anatomical and material care is vital.

1. Tightness and Circulation Limits (The 30-Minute Rule)

  • Strict Time Limit for Rings: Never wear the integrated ring for longer than 30 minutes at a time. Whether you are using the cock and ball ring model to anchor the toy or the Double Fun rabbit model where the single ring rests against the anatomy, these loops restrict local blood flow by design to enhance firmness and stamina. Leaving the product on for longer than 30 minutes starves delicate genital tissue of fresh oxygenated blood, which can cause permanent nerve damage, severe tissue bruising, or priapism (a dangerous, prolonged erection requiring emergency medical care).

  • Remove Immediately If: If you notice any extreme bruising, coldness to the touch, deep purple or blue discolouration, sudden throbbing pain, or a complete loss of sensation, remove the ring and shafts immediately.

  • Do Not Sleep: Never fall asleep while wearing this product. If you lose consciousness while blood flow is restricted, the results can be catastrophic.

2. Multi-Shaft Insertion & Double Penetration Safety

  • Pacing and Relaxation: Double penetration places unique physical demands on the body. Proceed slowly, communicate constantly with your partner, and focus on deep breathing to allow the pelvic floor muscles to relax naturally. Never force insertion. If either partner experiences sharp pain, sudden discomfort, or bleeding, stop immediately and gently withdraw the shafts.

  • Identify the Orifices: Ensure you understand which shaft is intended for which orifice based on your positioning. Never change the positioning of the shafts from the anus to the vagina mid-session without a thorough antibacterial wash. Rectal bacteria introduced into the vagina can cause severe health complications, such as Thrush or Bacterial Vaginosis (BV).

3. Battery Management & First-Use Activation

  • Transit Blocker Removal: Slide the bullet vibrator out of its silicone holder (located at the base or within the clitoral attachment). Unscrew the base of the bullet and remove the small white protective cap or paper disc. This blocker must be removed to allow the electrical circuit to connect, as its only purpose is to prevent the batteries from draining during transit.

  • Button Cell Discipline: The device requires 3 x LR44 button cell batteries (included). If they slide out, stack them back inside ensuring they all face the correct direction. Never mix old and new batteries. Button cell batteries can leak toxic chemicals if left flat inside a device; remove them entirely if the toy will be left unused for more than a few weeks.

4. Electrical & Waterproofing Safety (The Two-Part System)

  • The Removable Bullet: While the main silicone double-penetrator body is completely waterproof, the silver ABS plastic bullet vibrator is strictly non-submersible.

  • Avoid Water Submersion: Never submerge the bullet vibrator under water or use it in a bath. If water leaks past the screw threads of the bullet cap, it will instantly short-circuit the single-speed motor, ruin the electronics, or cause a mild electric shock. Ensure the bullet and your hands are completely dry before unscrewing the cap.

5. Lubricant Compatibility (Crucial for Silicone)

  • Water-Based Only: You must strictly use a generous amount of high-quality water-based lubricant on both your body, your partner’s body, and the silicone shafts to ensure a smooth, friction-free experience.

  • Never Use Silicone Lubes: Do not use silicone-based lubricants under any circumstances. Because the entire body of these double penetrators is made from 100% premium silicone, a silicone-based lube will chemically react with it, permanently melting the smooth texture (including the rabbit ears on the Double Fun model) and making it sticky, degraded, and completely unusable.

  • Avoid Oils: Avoid oil-based products (such as Vaseline, baby oil, or body lotions) as they will quickly degrade the silicone structural integrity and break down latex condoms.

6. Cleaning, Maintenance, and Hygiene

  • Always Separate the Parts: Before cleaning, you must completely slide the ABS plastic bullet vibrator out of its silicone holder.

  • Washing: * Silicone Double Penetrator: Wash thoroughly with warm water and a mild, unscented antibacterial soap or a purpose-made toy cleaner. Ensure you wash inside the rings and all contoured areas where fluids collect. Because it is 100% silicone, you can sterilise the main silicone body by boiling it in a clean pot of water for 3–5 minutes (ensure the bullet is removed first). Allow it to cool completely before reassembly.

    • ABS Bullet: Wipe the casing and power button down carefully with a damp antibacterial cloth; do not submerge it under water.

  • Meticulous Drying: Dry all components thoroughly with a lint-free cloth or allow them to air-dry completely before storing.

7. Safe Storage

  • Keep Separated (Critical): Never store the silicone double penetrator directly touching other silicone toys. Left in contact, different silicone items will chemically react and permanently melt into each other. Store your dried toy and bullet inside its original packaging or wrapped inside a clean, separate, breathable cloth pouch (like cotton). Keep it in a cool, dry place away from direct sunlight, central heating radiators, children, and pets.

8. Regular Inspection

  • Check for Structural Tears: Before each use, gently flex the shafts and stretch the silicone loops. Inspect the high-stress junction points where the shafts meet the base ring or the rabbit ears. If you notice any hairline cracks, nicks, or small tears, discontinue use immediately. Because these items are under high physical tension when worn and flexed during thrusting, a small nick can cause the silicone to snap violently, resulting in painful snapped-skin injuries. Verify the bullet powers on and off correctly before positioning the toy.

Disposal Information

Thank you for choosing the Loving Joy Double Penetrator (whether you own the Double Penetration Strap-On Vibrator or the Double Fun Vibrating Rabbit Double Penetration Strap-On). When it comes time to dispose of this product, please follow these instructions to ensure environmentally responsible disposal in compliance with Waste Electrical and Electronic Equipment (WEEE) regulations and international waste management standards:

1. Battery Removal: Before disposing of the product, you must remove the batteries. Gently slide the removable bullet vibrator out from its pocket in the base or the clitoral attachment of the toy. Unscrew the cap of the bullet and tip out the 3 x LR44 button cell batteries. Never leave batteries inside a device intended for disposal, as they can leak, corrode, or pose a fire hazard.

2. Battery Disposal: Button cell batteries must not be disposed of in your regular household waste bin. Please take the 3 x LR44 batteries to a designated battery recycling point. These dedicated collection boxes are widely available at local supermarkets, electronic retail stores, and civic amenity or recycling sites worldwide.

3. Electronic Components (WEEE Compliance): The internal motor, micro-wiring, and housing of the removable bullet vibrator are classified as electronic waste. Under international environmental directives, this component must not be thrown away with regular trash or placed in standard municipal household bins. Please take the separated bullet mechanism to a local electronic waste recycling centre or a dedicated e-waste drop-off facility, where the electrical components can be safely extracted and processed.

4. Silicone and Plastic Outer Materials: This product is composed of a rigid ABS plastic bullet and a large, body-safe silicone double-penetrator shaft with an integrated ring structure.

  • Silicone Body (Shaft and Rings): Because this component has been used intimately, it is strictly non-recyclable through standard municipal schemes. Wash it thoroughly with warm water and a mild antibacterial soap, allow it to dry, and wrap it securely in an opaque bag or newspaper to maintain your privacy before placing it into your general household rubbish bin.

  • ABS Plastic Housing: Standard domestic kerbside recycling schemes do not accept hard, rigid ABS plastic mixed with daily household recyclables. The e-waste recycling centre is equipped to process the bullet casing along with the electrical components.

5. Packaging: If you still have the original packaging, please recycle it responsibly according to your region’s guidelines:

  • Cardboard Box/Sleeve: This can be collapsed flat and placed directly into your local paper and cardboard recycling stream.

  • Internal Plastic Packaging: Check any internal plastic trays, bags, or wrappers for regional recycling symbols and dispose of them according to your local plastic recycling infrastructure.

By following these steps, you help ensure that your Loving Joy Double Penetrator is disposed of in an environmentally friendly and legally compliant manner. Thank you for your cooperation in protecting our planet.

Disclaimer: All products placed on the market by Loving Joy Limited prior to December 13, 2024, remain marketable as they are governed by the provisions of the previous legislation.