Loving Joy Bully Boy Realistic Vibrator

Important Safety Warnings for Your Loving Joy Bully Boy Realistic Vibrator

To ensure a safe, hygienic, and highly satisfying experience with your Loving Joy Bully Boy Realistic Vibrator (available in Flesh and Black), please read and strictly adhere to the following safety guidelines. This lifelike vibrator utilizes a multi-speed twist-dial base, internal motor wiring, and an outer body made from PVC (Polyvinyl Chloride).

1. Battery Installation & Twist-Dial Care

• Correct Insertion: To power the device, carefully unscrew the base of the vibrator. Insert 2 x AA batteries (not included) following the polarity guides (+/-) printed inside the compartment, then screw the base firmly back on. Ensure it is threaded correctly to maintain a proper electrical connection.

• Dial Operation: Do not force the twist-dial mechanism past its natural stopping point when adjusting the vibration strength. Twisting the base too aggressively can snap the internal wiring or break the rotational switch contacts.

• Battery Discipline: Do not mix old and new batteries, or mix different brands or types. Never leave dead batteries inside the toy, as they can leak toxic battery acid, permanently destroying the internal motor and creating a chemical burn hazard. Remove the batteries entirely if the device is left unused for more than a few weeks.

2. Electrical & Waterproofing Safety (Critical)

• Non-Waterproof Twist Base: While the textured PVC shaft is non-porous, the twisting mechanics and battery threads at the base are strictly non-waterproof and not submersible.

• Avoid Water Submersion: Never use this realistic vibrator in the bath, under a heavy running shower, or submerge the handle in water. If water leaks past the twisting base seams, it will instantly short-circuit the electronics, cause the batteries to overheat rapidly, or cause a mild electric shock. Always ensure your hands and the base of the toy are completely dry before opening it.

3. Lubricant Compatibility (Crucial for PVC)

• Water-Based Only: You must strictly use a generous amount of high-quality water-based lubricant on both your body and the shaft of the toy to ensure a smooth, comfortable insertion.

• Avoid Silicone and Oil: Do not use silicone-based or oil-based lubricants (such as Vaseline, baby oil, or massage lotions) under any circumstances. These will chemically react with the realistic PVC skin, causing the material to degrade, become tacky, warp, or bleed plasticisers, making the toy completely unusable.

4. Overheating and Motor Care

• Interval Play: The internal motor handles variable speeds controlled by the dial. Running the motor continuously at maximum strength for prolonged periods can cause the internal handle mechanism to overheat.

• Allow to Cool: It is recommended to limit continuous use to 20 minutes per session. If the twisting base or handle begins to feel uncomfortably warm, dial the device completely off and allow it to cool down to room temperature before resuming use.

5. Intended Use and Physical Injury Prevention

• Vaginal and External Use Only: This realistic vibrator is ergonomically engineered strictly for vaginal insertion and external stimulation.

• Absolute Anal Ban: Never insert this toy into the anus. It completely lacks an anatomically safe, flared safety base. The rectum creates a natural vacuum suction and can easily pull the entire shaft and twisting handle completely inside the body, which constitutes a medical emergency requiring immediate hospital surgical extraction.

6. Cleaning, Maintenance, and Hygiene

• Careful Washing: Wash the toy thoroughly immediately after every single use. Always keep the toy pointing downwards so water runs away from the battery compartment and twist-dial seams. Wash the textured PVC shaft using warm water and a mild, unscented antibacterial soap or a purpose-made adult toy cleaner.

• Do Not Submerge the Base: Wipe the twisting controller base carefully with a damp cloth; do not place the base under a running tap or submerge it. Never use boiling water, microwaves, or dishwashers to clean this electronic item, as extreme heat will melt the PVC exterior and destroy the internal mechanics.

• Meticulous Drying: Dry the toy thoroughly with a lint-free cloth or allow it to air-dry completely before storing.

7. Safe Storage

• Keep Separated (Critical): Never store PVC toys directly touching other toys. PVC contains plasticisers that will chemically react, migrate, and permanently melt into other silicone, TPE, or PVC items if left in contact. Store your vibrator inside its original box or wrapped inside a clean, separate, breathable cotton pouch. Keep it in a cool, dry place away from direct sunlight, central heating radiators, children, and pets.

8. Regular Inspection

• Check for Skin Defects: Before each use, inspect the smooth tip and textured veins on the PVC shaft. If the toy shows any signs of deep splitting, surface stickiness, permanent discolouration, or a strong chemical odour, discontinue use immediately. Turn the twist-dial on before insertion to verify that the motor smoothly scales through intensities without stuttering or cutting out.