Loving Joy Bullet Vibrators

Thank you for purchasing the Loving Joy Bullet Vibrator. Please follow these instructions to ensure the safe, optimal, and effective use of your product.

This instruction guide applies to all five colour variants (Pink, Purple, Black, Gold, and Silver). All models are crafted from smooth, premium ABS plastic and utilise an intuitive single-button interface.

Contents

• 1 x Loving Joy Bullet Vibrator

Battery Installation Instructions

This device requires 1 x AAA battery (not included). A high-quality alkaline battery is recommended for optimal power and performance.

1. Open the Compartment: Ensure the device is turned off and dry. Carefully unscrew the bottom cap of the bullet (the end featuring the control button) anti-clockwise.

2. Insert the Battery: Insert the 1 x AAA battery into the internal compartment, pushing the positive (+) end in first towards the top of the bullet, leaving the flat negative (-) end resting against the base cap.

3. > Crucial Paper Liner Note: Inside the battery chamber, you will see a small piece of white paper lining the wall. Do not remove this paper. It is an intentional design feature engineered to insulate the electrical flow and hold the battery securely in position.

4. Close Securely: Screw the base cap firmly back onto the bullet clockwise to ensure a flush, secure connection.

Operating Instructions

This classic, travel-friendly bullet vibrator delivers powerful pinpoint external stimulation. It can be used directly against your sweet spots or placed inside compatible harness and sleeve pockets.

• For Pink, Purple, Black, and Gold Bults (10 Functions):

  1. Power On: Press and hold the button down for 3 to 5 seconds until the vibrations begin.

  2. Cycle Functions: Once the device is on, give the button a short press to cycle through the 10 unique vibration patterns and speeds.

  3. Power Off: Press and hold the button down again for 3 to 5 seconds until the vibrations completely stop.

• For the Silver Bullet (Single Speed):

  1. Power On/Off: This classic model features straightforward simplicity. Press and hold the button for 3 to 5 seconds to turn the steady, powerful vibration on, and press and hold it again for 3 to 5 seconds to turn it off.

Cleaning, Maintenance, and Waterproofing

1. Isolate: Ensure the device is turned off before cleaning.

2. Washing: Wipe down the smooth ABS plastic body with warm water and a mild, unperfumed anti-bacterial soap, or use a specialised sex toy cleaner.

   • > Waterproofing Note: While this bullet is splash-proof for easy cleaning, it is not submersible. Never submerge the device completely under water or hold it directly under heavy running water, as moisture crossing the screw-cap seal will permanently damage the internal battery terminals.

3. Drying: Thoroughly pat the device dry with a clean, lint-free cloth.

4. Storage: Store your bullet in a cool, dry place away from direct sunlight. ABS plastic is highly stable, making it safe to store loosely in your toy drawer, but keeping it inside a cloth pouch will protect it from household dust.

Safety Precautions & Battery Care

• Lubricant Compatibility: Because this bullet is crafted from rigid ABS plastic, it is completely compatible with all standard lubricants. For the most comfortable experience and easiest cleanup, a high-quality water-based lubricant is highly recommended.

• Avoid using the device on swollen, bruised, broken, or inflamed areas of skin.

• Discontinue use immediately if you experience any sudden discomfort or irritation.

• Long-Term Storage: If you do not plan to use the bullet for a few weeks, always remove the AAA battery. Leftover batteries can leak over time, causing irreversible corrosion to the internal terminal contacts.

• Keep out of reach of children and household pets.

Customer Support

If you have any questions, troubleshooting issues, or concerns regarding your Loving Joy Bullet Vibrator, please reach out directly to our dedicated customer service team. We are here to support you as best as possible to ensure you get the most out of your experience!

Enjoy your powerful, pinpoint experience with the Loving Joy Bullet Vibrator!

To ensure a safe, hygienic, and highly satisfying experience with your Loving Joy Bullet Vibrator (available in Pink, Purple, Black, Gold, and Silver), please read and strictly adhere to the following safety guidelines. Whether you are using the 10-function models (Pink, Purple, Black, Gold) or the single-speed model (Silver), they all feature a rigid ABS plastic body and a screw-cap battery compartment.

1. Battery Installation & The Internal Liner

• Correct Insertion: To power the device, carefully unscrew the bottom cap of the bullet (the end with the power button). Insert 1 x AAA battery (not included) with the positive (+) end facing into the bullet first, and the flat negative (-) end resting against the spring in the base cap. Screw the cap firmly back onto the bullet to ensure a secure electrical connection.

• Do Not Remove the White Paper: Inside the battery compartment, you will see a piece of white paper lining the tube. Do not remove this paper. It is a functional insulation and stabilizer shield designed to hold the battery securely in position, prevent rattling, and stop the battery from short-circuiting against the internal walls.

• Battery Discipline: Never leave a flat battery inside the bullet. Dead batteries can leak toxic battery acid over time, permanently destroying the internal circuitry and creating a chemical burn hazard. Remove the battery entirely if the toy will be left unused for more than a few weeks.

2. Electrical & Waterproofing Safety (Critical)

• Not Submersible: These bullet vibrators are only splashproof and are strictly not submersible.

• Avoid Water Submersion: Never use these bullet vibrators in the bath, under a heavy running shower, or submerge them in a sink. If water leaks past the screw threads of the base cap, it will instantly short-circuit the motor, corrupt the internal electronics, or cause a mild electric shock. Always ensure your hands and the exterior of the bullet are completely dry before unscrewing the cap to change the battery.

3. Lubricant Compatibility

• Universal Fluid Safety: Because the entire chassis of these bullets is constructed from high-density, rigid ABS plastic, they are universally compatible with water-based, silicone-based, or hybrid lubricants.

• Generous Application: ABS plastic has absolutely no natural “give” or flexibility. Using a high-quality lubricant is essential to ensure smooth skin contact and prevent friction burns or skin chafing against sensitive areas.

• Avoid Oils: Avoid oil-based products (such as Vaseline, baby oil, or massage lotions) as they are difficult to wash away completely and will instantly degrade any latex condoms used in tandem.

4. Overheating and Motor Care

• Interval Play: These bullets pack a high-torque motor into a very compact space. Running the motor continuously for prolonged periods can cause the rigid plastic casing to overheat.

• Allow to Cool: It is recommended to limit continuous use to 15–20 minutes per session. If the ABS body begins to feel uncomfortably warm to the touch, turn the device off by pressing and holding the power button for a few seconds, and allow it to cool down completely to room temperature.

5. Intended Use and Physical Injury Prevention

• External and Vaginal Use Only: These compact bullets are designed exclusively for external clitoral/genital stimulation or shallow vaginal play.

• Absolute Anal Ban: Never insert a bullet vibrator into the anus. These items completely lack a flared base or a secure retrieval cord. The rectum operates like a vacuum and can instantly pull small, slick objects entirely inside the body, which constitutes a medical emergency requiring immediate hospital surgical extraction.

• Avoid Numbing: Do not press the rigid tip of the bullet aggressively hard against sensitive erectile tissue, as intense vibrations combined with heavy localized pressure can cause temporary numbing or minor tissue bruising.

6. Cleaning, Maintenance, and Hygiene

• Careful Washing: Wash the toy thoroughly immediately after every single use. Keep the bullet pointing downwards so water runs away from the base button cap. Wash the shaft using warm water and a mild, unscented antibacterial soap or a purpose-made adult toy cleaner.

• Do Not Submerge: Wipe the base cap button area down carefully with a damp cloth; do not place the entire unit under a running tap. Never use boiling water, microwaves, or dishwashers to clean this electronic item, as extreme heat will melt the internal seals and destroy the mechanics.

• Meticulous Drying: Dry the toy thoroughly with a lint-free cloth or allow it to air-dry completely before storing.

7. Safe Storage

• Universal Storage: Unlike silicone or TPE toys, rigid ABS plastic will not chemically react, stain, or melt when touching other adult novelty items in your collection.

• Environment: Store your bullet inside its original box or a separate, clean cloth pouch. Keep it in a cool, dry place away from direct sunlight, central heating radiators, children, and pets.

8. Regular Inspection

• Check for Surface Defects: Before each use, inspect the smooth ABS plastic body. If the bullet has been dropped on a hard surface (like bathroom tiles), check carefully for any cracks, chips, or sharp plastic edges that could cause external scratching or skin lacerations. Turn the device on to verify it cycles through its functions correctly (the single speed for the Silver bullet, or the 10 patterns for the Pink, Purple, Black, and Gold models) before play begins.