Loving Joy 5″ Classic Dildo with Suction Cup

Name: Loving Joy Beginners Pegging Strap On Kit

SKU: N11474

Barcode: 5060211963759

UK Responsible Person: Loving Joy Limited

Address: Adur Business Centre, Little High Street
Shoreham-By-Sea, West Sussex, BN43 5EG

Contact: [email protected]

EU Responsible Person: Net1on1 Wholesale B.V. i.o

Address: Atoomweg 63, 3542 AA, Utrecht, Nederland

Contact: [email protected]

Instructions for Use

1. Preparation and Hygiene

Before using the kit for the first time, and before every subsequent use, it is essential to clean the components properly.

  • The Silicone Dildo: Wash the dildo thoroughly with warm water and an unperfumed anti-bacterial soap, or a specialised sex toy cleaner.

  • The PP Fabric Harness: Polypropylene (PP) fabric is strong and durable. Wipe it down with a damp, soapy cloth, or hand wash it in warm soapy water if it requires a deeper clean. Allow it to air dry completely.

2. Assembly and Features

This kit features customisable elements for both the wearer and the receiver.

  1. Add a Vibrator (Optional): If you wish to turn this into a vibrating strap-on, insert your favourite standard-sized bullet vibrator (not included) into the designated pocket located at the back of the harness’s front panel. This positions the vibrator to provide stimulation to the wearer.

  2. Insert the Dildo: Squeeze the head of the silicone dildo and push it through the back of the harness’s O-ring.

  3. Secure the Base: Pull the shaft all the way through until the wide suction cup base sits flat and flush against the inside of the front panel. This wide base prevents the dildo from slipping out during use.

  4. Alternative Solo Use: Because the dildo features a suction cup base, it can also be used independently of the harness. Simply press the base firmly against any smooth, flat, non-porous surface (like bathroom tiles or glass) for hands-free solo play.

3. Fitting the Harness

  1. Waistband: Step into the harness or wrap the main straps around your waist/hips. Adjust the buckles or sliders so the dildo sits comfortably and securely against your pelvic area. It should be snug, but not uncomfortably tight.

  2. Leg Straps: Pass the lower straps down between your legs and around your thighs or under your buttocks, securing them to the designated loops on the back of the waistband. Adjust these until the harness feels stable and the front panel stays firmly in place when you move.

4. Safe Usage Guidelines

  • Lubrication: Because the dildo is made from silicone, it is absolutely vital that you only use water-based lubricant (lube). Using a silicone-based lubricant will cause a chemical reaction that permanently melts and ruins the surface of the toy. Apply generously to both the toy and your partner.

  • Communication: Because the wearer cannot physically feel what the toy is touching, constant communication with your partner is essential. Check in frequently about comfort, depth, and pacing.

  • Pacing: Start very slowly, especially if pegging is new to either partner. Use plenty of lubricant and take your time to ensure a comfortable and pleasurable experience.

5. Cleaning and Storage

  • Disassemble: Remove the bullet vibrator (if used) and pull the silicone dildo out of the harness.

  • Cleaning: Wash the dildo immediately with warm water and soapy water or toy cleaner. Pat it completely dry with a clean, lint-free towel. Wipe down the harness if necessary.

  • Storage (Crucial): Store the silicone dildo in a cool, dry place away from direct sunlight. You must store silicone toys separately from other sex toys (especially those made of other silicones, TPR, or PVC) to prevent them from chemically reacting and melting together. Store the dildo in a cloth pouch or isolated compartment.

Important Safety Warnings for Your Loving Joy Beginners Pegging Kit

Pegging (where a partner wears a strap-on to anally penetrate the other) requires excellent communication, the right equipment, and strict attention to safety. To ensure a safe, hygienic, and enjoyable experience with your Loving Joy Beginners Pegging Kit, please read and adhere to the following guidelines for both the silicone dildo and the PP fabric harness.

1. Crucial Anal Play & Communication Safety:

  • The Receiver Sets the Pace: Anal tissue does not self-lubricate and is highly sensitive to tearing. The receiving partner must always control the speed, depth, and intensity of the play.

  • Establish a Safe Word: Always agree on a clear safe word (e.g., “Red”) before you begin. If the safe word is used, stop all movement and gently withdraw immediately.

  • Harness Security: Before use, ensure the silicone dildo is pushed securely and deeply through the O-ring of the harness. If the dildo is loose, it poses a severe risk of detaching and becoming lost inside the receiving partner’s rectum, which would require a medical emergency to retrieve.

2. Silicone Dildo Care & Lubricant Compatibility:

  • Water-Based Lubricant Only: You must use generous amounts of a high-quality, water-based lubricant. Never use silicone-based lubricants, as they will permanently melt, degrade, or damage the liquid silicone material of the dildo.

  • Avoid Oils: Avoid oil-based lubricants (like coconut oil or Vaseline), especially as they can be very difficult to wash off and will destroy latex condoms.

  • Sterilisation: Because the dildo is made of 100% silicone, you can deep-clean it by removing it from the harness and boiling it in water for 3–5 minutes. Alternatively, wash thoroughly with warm water and an unscented antibacterial soap.

  • Storage: Store the dildo away from direct sunlight and never let it touch other silicone toys, as they will chemically react and melt together.

3. PP Fabric Harness Safety & Care:

  • Fit and Circulation: The harness is made from PP (Polypropylene) fabric webbing. Adjust the straps so they sit snugly against the wearer’s body to provide stability, but ensure they are not pulled so tight that they restrict blood flow or dig painfully into the hips, groin, or thighs.

  • Friction Burns: If the harness is too loose, it will rub against the skin during thrusting, causing painful chafing or friction burns for the wearer. Take the time to adjust the buckles for a secure, flush fit.

  • Washing: PP fabric absorbs sweat and bodily fluids. Hand-wash the harness in warm water with a mild, skin-safe detergent. Do not put it in the washing machine or tumble dryer, as heat and agitation will destroy the elastic, warp the plastic buckles, and weaken the webbing. Allow it to air-dry completely.

4. Hygiene and Cross-Contamination:

  • Use Condoms: Even though silicone can be sterilised, using a fresh condom over the dildo makes cleanup incredibly easy and is highly recommended, especially for anal play.

  • Do Not Cross-Contaminate: Never move the dildo from the anus to a vagina without thoroughly washing it first or changing the condom, as this can cause severe bacterial infections (such as Thrush or Bacterial Vaginosis).

5. Regular Inspection and Disposal:

  • Check for Wear: Regularly inspect the O-ring, the stitching, and the buckles on the harness. If the O-ring stretches out or the stitching tears, the harness is no longer safe to use. Inspect the silicone dildo for micro-tears where bacteria can hide.

  • Disposal: If the kit reaches the end of its lifespan, dispose of both components in your general household waste (securely wrapped to maintain privacy). Neither mixed PP fabric/hardware nor silicone are typically accepted by standard UK council recycling schemes.

Disposal Information

1. Material Identification: This kit consists of two main components with different material properties. The dildo is made from silicone, and the strap-on harness is made from PP (Polypropylene) fabric, typically featuring some structural metal or hard plastic hardware (such as O-rings or adjustment buckles).

2. Cleaning & Disassembly: * Cleaning: Before disposal, ensure both parts are thoroughly cleaned. The silicone dildo can be sterilised by boiling it in water for a few minutes or washing it with warm water and a mild antibacterial soap. The PP fabric harness should be hand-washed in warm water with a mild detergent and left to air dry.

  • Disassembly: It is crucial to separate the materials before disposal. Remove the dildo from the harness O-ring. Then, use a sturdy pair of scissors to cut the PP fabric straps away from any metal or hard plastic buckles and rings.

3. Disposal:

  • Silicone Dildo: Silicone is not accepted in standard kerbside recycling. You will need to dispose of it in your general household waste bin, securely wrapped in an opaque bag or newspaper for privacy. Alternatively, check if there are any specialised adult toy recycling programmes in the UK that accept silicone via mail-in schemes.

  • PP Fabric Harness: Because this synthetic textile has been used intimately, it is not suitable for standard clothing or textile recycling banks. The fabric components must be disposed of in your general household waste bin.

4. Packaging:

  • Cardboard Box: The outer cardboard packaging can easily be recycled with your regular council paper and cardboard collection.

  • Internal Packaging: Any internal plastic bags or blister packs should be checked for recycling symbols. If they are accepted by your council, dispose of them in your plastics recycling bin; otherwise, place them in general waste.

5. Environmental Considerations: Always aim to minimise waste by considering the environmental impact. Due to the highly intimate nature of this product, donating or reselling it is not recommended for health and hygiene reasons. Taking the extra step to separate the recyclable metal hardware from the non-recyclable synthetic fabric and silicone ensures that you are disposing of the kit in the safest and most responsible manner possible.

By following these instructions, you can help ensure that your Loving Joy Beginners Pegging Kit is disposed of responsibly, minimising its environmental impact.

Disclaimer: All products placed on the market by Loving Joy Limited prior to December 13, 2024, remain marketable as they are governed by the provisions of the previous legislation.