Loving Joy Anal Douches

Name: Loving Joy Anal Douche 160ml

SKU: N10953

Barcode: 5060211962790

Loving Joy Anal Douche Bulb

Name: Loving Joy Anal Douche 225ml

SKU: N10796

Barcode: 5060211962622

UK Responsible Person: Loving Joy Limited

Address: Adur Business Centre, Little High Street
Shoreham-By-Sea, West Sussex, BN43 5EG

Contact: [email protected]

EU Responsible Person: Net1on1 Wholesale B.V. i.o

Address: Atoomweg 63, 3542 AA, Utrecht, Nederland

Contact: [email protected]

Instructions for Use

1. Preparation and Hygiene

Before using the douche for the first time, and before every subsequent use, it must be completely sanitised to ensure safe, hygienic play.

  • Disassemble: Gently pull the rigid ABS plastic nozzle out of the flexible PVC bulb.

  • Initial Cleaning: Wash both the inside and outside of the bulb, as well as the entire nozzle, thoroughly with warm water and an unperfumed anti-bacterial soap, or a specialised sex toy cleaner.

  • Drying: Allow both parts to air dry completely or pat them dry with a clean, lint-free towel before assembly.

2. How to Use

An anal douche is designed to flush the lower rectum with water for cleanliness before intimate play. It is best used in the bathroom or shower.

  1. Fill the Bulb: Submerge the open PVC bulb in a clean bowl of lukewarm water (or hold it under a running tap) and squeeze it repeatedly to draw the water inside until filled. Note: Ensure the water is body temperature. Water that is too hot or too cold can cause uncomfortable internal cramping.

  2. Attach the Nozzle: Push the ABS nozzle firmly back into the neck of the bulb, ensuring it sits tightly so water does not leak from the sides.

  3. Lubricate: Apply a generous amount of water-based lubricant to the smooth ABS nozzle and around the opening of the anus to ensure a comfortable, friction-free insertion.

  4. Insertion and Flushing: * Sit on the toilet or stand in the shower in a comfortable position.

    • Gently slide the lubricated nozzle into the rectum.

    • Squeeze the bulb smoothly and steadily to release the water internally.

  5. Evacuate: Remove the nozzle and hold the water inside for a few seconds if comfortable, then naturally release the water and waste directly into the toilet. Repeat the filling and flushing process 2–3 times until the expelled water runs completely clear.

3. Safe Usage Guidelines

  • Lubricant Compatibility: Because the nozzle is ABS plastic and the bulb is PVC, it is highly compatible with most lubricants. However, a premium water-based lubricant is highly recommended as it is easiest to wash away and completely safe for your body.

  • Gentle Pressure: Always squeeze the bulb gently. Forcing water too quickly or deeply into the bowel can lead to discomfort, bloating, or mild cramping.

  • Listen to Your Body: Insertion should never feel painful. If you feel sharp resistance or discomfort, stop immediately, add more lubricant, and proceed slowly.

4. Cleaning and Storage

Proper aftercare is essential for any hygiene device to prevent the buildup of bacteria or internal mould.

  • Post-Use Cleaning: Disassemble the nozzle from the bulb immediately after use. Flush the inside of the PVC bulb several times with warm, soapy water to clean out any residual waste. Wash the ABS nozzle thoroughly, ensuring water passes through the tip holes.

  • Drying (Crucial): Shake out all excess water from the inside of the bulb. Stand the bulb upside down or prop it open in a well-ventilated area to ensure the internal chamber dries out completely. Storing it while damp can cause internal mould.

  • Storage: Once 100% dry, store the disassembled components in a cool, dry place away from direct sunlight. PVC and ABS plastic are stable materials, but keeping them in a dedicated cloth pouch protects the nozzle from collecting household dust.

Important Safety Warnings for Your Loving Joy Anal Douche

To ensure a safe, hygienic, and comfortable preparation process with your Loving Joy Anal Douche (available in 160ml and 225ml sizes), please read and strictly adhere to the following safety guidelines. Cleansing the lower bowel requires gentle techniques and proper care to protect delicate internal tissues.

1. Pressure, Insertion, and Pacing

  • Lubrication is Essential: The nozzle is made from rigid ABS plastic. Never attempt to insert the nozzle without applying a generous amount of water-based lubricant to both the nozzle and your anus. Forcing an unlubricated, rigid nozzle can cause painful friction burns, hemorrhoidal irritation, or micro-tears in the rectal lining.

  • Gentle Insertion: Relax your pelvic muscles and insert the nozzle slowly and gently. Do not push the nozzle in deeper than is comfortable.

  • Squeeze Slowly: When administering the water, squeeze the flexible PVC bulb with a slow, steady pressure. Never squeeze the bulb forcefully or aggressively. Rapidly forcing water into the rectum can cause painful cramping, bloating, sudden bowel spasms, or internal tissue irritation.

2. Water Temperature and Fluid Safety

  • Use Lukewarm Water Only: The water used inside the douche must be comfortable to the touch—ideally at body temperature ( / ). Never use hot water, as it can easily scald or severely burn the highly sensitive internal lining of the rectum. Conversely, water that is too cold will trigger intense, painful abdominal cramps.

  • Pure Water Only: Unless specifically prescribed by a medical doctor, use only clean, lukewarm tap water or distilled water. Do not mix soaps, household disinfectants, alcohol, or harsh chemicals into the water, as these will destroy the rectum’s natural mucous barrier and cause severe chemical burns.

  • Avoid Over-Douching: Douching should be done occasionally (e.g., prior to intimate play). Avoid douching multiple times a day or as a daily habit, as excessive use strips away healthy gut bacteria, dries out the rectal lining, and can disrupt your body’s natural bowel movements.

3. Preventing Back-Suction (Hygiene Control)

  • Maintain the Squeeze: When you have finished administering the water, keep the PVC bulb completely compressed while withdrawing the nozzle from your body. If you release your grip on the bulb while the nozzle is still inside the rectum, it will act as a vacuum and suck fecal matter and dirty water back into the bulb, permanently contaminating the interior of the device.

4. Cleaning, Maintenance, and Disassembly

  • Wash Immediately After Use: Separate the rigid ABS plastic nozzle from the flexible PVC bulb immediately after each use.

  • Thorough Flushing: Wash both pieces thoroughly inside and out using warm water and a mild, unscented antibacterial soap or a dedicated adult toy cleaner. Flush the inside of the PVC bulb multiple times with soapy water, shake it vigorously, and squeeze it out until the water runs completely clear.

  • Do Not Boil or Microwave: Never attempt to sterilize the douche by boiling it, microwaving it, or putting it in the dishwasher. High heat will warp or crack the rigid ABS nozzle and permanently melt or misshape the flexible PVC bulb.

  • Complete Drying: Allow both parts to air-dry completely while separated. Prop the PVC bulb upside down so any trapped moisture can drain out. Storing the douche while damp inside will rapidly lead to internal mould, mildew, and hazardous bacterial growth.

5. Safe Storage

  • Keep Separated from Other Plastics: PVC can chemically react with other synthetic materials if left touching them over long periods. Store the disassembled douche in its original packaging or a dedicated, breathable cotton pouch.

  • Environment: Store in a cool, dry place out of direct sunlight and away from radiators. Keep out of reach of children and pets.

6. Regular Inspection

  • Check for Structural Wear: Before each use, inspect the ABS nozzle for any cracks, chips, or sharp edges caused by an accidental drop. A chipped nozzle can cause severe internal lacerations. Inspect the PVC bulb for leaks or internal mould spots. If any damage or mould is found, discontinue use immediately.

By adhering to these comprehensive safety warnings, you can ensure a hygienic, safe, and comfortable cleansing routine with your Loving Joy Anal Douche.

Disposal Information

When it comes time to dispose of your Loving Joy Anal Douche (whether you have the 160ml or 225ml model), please follow these guidelines to ensure proper disposal and recycling:

1. Material Identification: This product is constructed from two distinct materials. The flexible squeeze bulb is made from PVC (Polyvinyl Chloride), and the rigid, removable insertion nozzle is made from hard ABS (Acrylonitrile Butadiene Styrene) plastic.

2. Cleaning & Disassembly:

  • Cleaning: Before disposal, ensure the device is thoroughly cleaned. Separate the nozzle from the bulb and wash both components inside and out with warm water and a mild antibacterial soap or specialised cleaner. This ensures proper hygiene before the item enters the waste stream.

  • Disassembly: It is essential to fully separate the ABS plastic nozzle from the PVC bulb to allow for proper waste stream management.

3. Disposal:

  • PVC Bulb: Most local councils do not accept PVC in household kerbside recycling. The bulb should be placed in your general household waste bin (usually your black bin). To maintain your privacy, ensure it is securely wrapped in an opaque bag or newspaper.

  • ABS Plastic Nozzle: Hard ABS plastic is not accepted in standard council kerbside recycling bins. You can take the cleaned nozzle to your local Household Waste Recycling Centre (HWRC) to see if they have a dedicated “rigid/hard plastics” skip. If they do not, it must be securely wrapped and disposed of in your general waste bin.

  • Specialised Recycling: Check if there are any specialised adult toy or wellness recycling programmes. Certain eco-conscious retailers offer mail-in take-back schemes for intimate items that may accept these separated components.

4. Packaging:

  • Cardboard Box: The outer cardboard packaging can easily be recycled with your regular council paper and cardboard collection.

  • Internal Packaging: Any internal plastic bags or protective wraps should be checked for recycling symbols. If your local council accepts them, place them in your plastics recycling bin; otherwise, dispose of them in your general waste.

5. Environmental Considerations: Always aim to minimise waste by considering the environmental impact. Due to the highly intimate nature of this product and its intended use, donating or reselling it is strictly prohibited for health, safety, and hygiene reasons. Properly separating the rigid plastic nozzle from the flexible bulb ensures that the different material streams are disposed of as responsibly as possible.

By following these instructions, you can help ensure that your Loving Joy Anal Douche is disposed of responsibly, minimising its environmental impact.

Disclaimer: All products placed on the market by Loving Joy Limited prior to December 13, 2024, remain marketable as they are governed by the provisions of the previous legislation.