Loving Joy 10 Function Clitoral Suction Vibrator

Thank you for purchasing the Loving Joy 10 Function Clitoral Suction Vibrator. Please follow these instructions to ensure the safe, optimal, and effective use of your product.

Contents

• 1 x Loving Joy 10 Function Clitoral Suction Vibrator

Battery Installation Instructions

This device requires 2 x AAA batteries (not included). High-quality alkaline batteries are recommended for optimal power and performance.

1. Open the Chamber: Ensure the device is turned off and dry. Locate the battery compartment cover (typically accessed by sliding off the base/back panel of the device).

2. Insert Batteries: Place the 2 x AAA batteries into the internal compartment, paying close attention to the positive (+) and negative (-) polarity markings inside.

3. Seal and Secure: Securely close the battery cover back into place. Ensure it is tightly sealed and flush against the body of the toy to protect the internal components from moisture.

Operating Instructions

This device uses innovative Airwave pleasure technology to provide touch-free, pinpoint clitoral stimulation that mimics a delightful sucking sensation.

1. Power On/Off: Press and hold the power button for 3 to 5 seconds until the device turns on. To turn it off, press and hold the power button again for 3 to 5 seconds.

2. Function Selection: Once the device is powered on, quickly press the power button again to cycle through the 10 unique suction and pulsation functions.

3. Intimate Use: Apply a small amount of high-quality water-based lubricant around your clitoris or to the rim of the suction nozzle. Place the soft nozzle directly over your clitoris, creating a gentle seal against your skin, and explore the 10 customizable modes.

Cleaning, Maintenance, and Waterproofing

1. Isolate: Ensure the device is powered off completely before cleaning.

2. Washing: Wash the exterior of the toy under warm running water using a mild, unperfumed anti-bacterial soap or a specialised sex toy cleaner. Pay close attention to flushing out the suction nozzle to remove any residual lubricant or fluids.

   • > Waterproofing Note: While the exterior casing is splash-proof for easy cleaning, this item is not fully waterproof. Never submerge the device completely under water, as moisture entering the battery seals will ruin the internal electronics.

3. Drying: Thoroughly pat the device dry with a clean, lint-free cloth or leave it to air dry completely.

4. Storage: Store your product in a cool, dry place away from direct sunlight and extreme temperatures. Keep it in a cloth pouch or its original box to protect it from dust.

Safety Precautions & Battery Care

• ONLY use water-based lubricant. Using silicone-based lubricants, massage oils, or body lotions can degrade the finish and internal mechanics of your device over time.

• Do not use the device on swollen, bruised, broken, or inflamed areas of skin.

• Discontinue use immediately if you experience any sudden discomfort or irritation.

• Long-Term Storage: If you do not plan to use the device for a few weeks, remove the batteries completely. Leftover batteries can leak over time, causing irreversible corrosion to the internal terminal springs.

• Keep out of reach of children and household pets.

Customer Support

If you have any questions, troubleshooting issues, or concerns regarding your Loving Joy Clitoral Suction Vibrator, please reach out directly to our dedicated customer service team. We are here to support you as best as possible to ensure you get the most out of your experience!

Enjoy your customisable, pinpoint experience with the Loving Joy 10 Function Clitoral Suction Vibrator!

Important Safety Warnings for Your Loving Joy 10-Function Clitoral Suction Vibrator

To ensure a safe, hygienic, and highly satisfying experience with your Loving Joy 10-Function Clitoral Suction Vibrator, please read and strictly adhere to the following safety guidelines. This device uses airwave pleasure technology to create gentle pulsing sensations for pinpoint external stimulation, which places unique physical and mechanical demands on the product.

1. Battery Hazard & Proper Installation

• Correct Insertion: To power the device, open the battery compartment, insert 2 x AAA batteries (not included) matching the polarity diagrams (+/-) inside the chamber, and close it securely.

• Battery Discipline: Do not mix old and new batteries, or mix different brands or types (such as alkaline with rechargeable). Never leave flat batteries inside the toy, as they can leak toxic battery acid, permanently destroying the internal circuitry and creating a chemical burn hazard. Remove the batteries entirely if the device is left unused for more than a few weeks.

2. Electrical & Waterproofing Safety (Critical)

• Splashproof Only: While the smooth ABS plastic chassis is non-porous, the casing and battery compartment seams are only splashproof, not fully waterproof or submersible.

• Avoid Water Submersion: Never submerge this device in a bath or use it under a heavy running shower. Water leaking past the casing into the battery compartment or the internal suction motor can cause a short circuit, rapid battery overheating, asset damage, or a mild electric shock. Always ensure your hands and the exterior of the toy are completely dry before opening the battery compartment.

3. Lubricant Compatibility (Crucial for ABS Plastic)

• Generous Application: While ABS plastic is highly durable and smooth, using a high-quality lubricant inside the stimulation nozzle is important to ensure a comfortable, friction-free seal against the skin.

• Material Freedom: Because this device is made from rigid ABS plastic, it is universally compatible with water-based, silicone-based, or hybrid lubricants.

• Avoid Oils: Avoid oil-based products (such as Vaseline, baby oil, or massage lotions) as they are difficult to wash away completely and can degrade any internal rubber seals.

4. Overheating and Motor Care

• Interval Play: This device features a specialised airwave motor capable of running across 10 distinct pulsing and suction functions. Running the motor continuously for prolonged periods can cause the internal handle mechanism to overheat.

• Allow to Cool: It is recommended to limit continuous use to 20–30 minutes per session. If the casing begins to feel uncomfortably warm, turn the device off by pressing and holding the power button for 3–5 seconds, and allow it to cool down completely.

5. Intended Use and Physical Injury Prevention

• External Clitoral Use Only: This device is ergonomically engineered strictly for pinpoint external clitoral stimulation.

• Absolute Insertion Ban: Never insert this toy into the vagina or the anus. It is entirely rigid, lacks a flared base, and is not designed for internal use. Insertion can cause painful internal bruising, tissue pinching, or become lost inside an orifice, requiring immediate emergency medical intervention.

• Avoid Over-Suction: Airwave pleasure technology is highly effective. Do not press the nozzle aggressively hard against your skin or use the maximum settings for extended periods if your skin feels overly sensitive. Excessive negative pressure can cause localized swelling, skin pinching, or minor bruising (petechiae). If the sensation becomes too intense, pull the nozzle away immediately to break the suction seal.

6. Cleaning, Maintenance, and Hygiene

• Careful Washing: Wash the toy immediately after every single use. Keep the toy pointing downwards so water runs away from the battery compartment seams. Wash the stimulation nozzle thoroughly using warm water and a mild, unscented antibacterial soap or a purpose-made adult toy cleaner. Pay close attention to the deep recess of the nozzle where lubricant and bodily fluids can collect.

• Do Not Submerge: Wipe the handle down with a damp cloth; do not submerge it. Never use boiling water, microwaves, or dishwashers to clean this electronic item, as extreme heat will melt the internal components and destroy the circuitry.

• Meticulous Drying: Dry the toy thoroughly with a lint-free cloth or allow it to air-dry completely before storing.

7. Safe Storage

• Universal Storage: Unlike silicone or TPE toys, rigid ABS plastic will not chemically react or melt when touching other adult novelty items in your collection.

• Environment: Store your vibrator inside its original box or a separate, clean cloth pouch. Keep it in a cool, dry place away from direct sunlight, central heating radiators, children, and pets.

8. Regular Inspection

• Check for Surface Damage: Before each use, inspect the smooth ABS rim of the stimulation nozzle. If the toy has been dropped on a hard surface (like bathroom tiles), check carefully for any cracks, chips, or sharp plastic edges that could cause external scratching or skin lacerations. Discontinue use immediately if any structural damage or mechanical malfunctions occur.