Loving Joy TPE Penis Sleeves

Loving Joy Mighty 3 Inch Penis Extension with Ball Loop

Name: Loving Joy Mighty 3 Inch Penis Extension with Ball Loop

SKU: N10726

Barcode: 5060211962530

Loving Joy Extra Penis Extension Sleeve

Name: Loving Joy Extra 3 Inch Penis Extension

SKU: N10725

Barcode: 5060211962523

UK Responsible Person: Loving Joy Limited

Address: Adur Business Centre, Little High Street
Shoreham-By-Sea, West Sussex, BN43 5EG

Contact: [email protected]

EU Responsible Person: Net1on1 Wholesale B.V. i.o

Address: Atoomweg 63, 3542 AA, Utrecht, Nederland

Contact: [email protected]

Instructions for Use

1. Preparation and Warming

Because these extensions are made from TPE, they feature a soft, lifelike, skin-like texture that warms up to match body temperature exceptionally well.

  • Cleaning: Before your first use, and before every subsequent use, rinse the extension thoroughly inside and out with warm water and an unperfumed anti-bacterial soap, or a specialised sex toy cleaner.

  • Warming (Optional): To enhance the lifelike experience for both you and your partner, you can soak the sleeve in a bowl of warm (not boiling) water for 5 to 10 minutes before use. Always check the temperature against your inner wrist first to ensure it is comfortably warm, not hot.

2. How to Fit the Extensions

These extensions are designed to add 3 inches of length to the tip, as well as extra girth along the shaft. For the best results and easiest application, they should be rolled or slid on while semi-erect or erect:

  • Apply Lubricant: Apply a generous amount of water-based lubricant directly to your penis and a small splash inside the shaft of the sleeve. This will significantly reduce friction and help the sleeve slide into place.

  • Fitting the “Extra” 3 Inch Extension: Gently stretch the open end of the sleeve and slide it down the shaft of your penis until your tip rests flush against the solid chamber at the end of the extension. Ensure it fits snugly against the base of your pelvic wall.

  • Fitting the “Mighty” 3 Inch Extension (with Ball Loop): Slide the extension down the shaft of your penis just like the model above. Once the shaft is covered, gently stretch the attached lower loop and feed your testicles through it one at a time. This loop acts as a built-in cock ring, helping to keep the extension securely anchored to your body while boosting stamina and maintaining a harder erection.

3. Safe Usage Guidelines

  • Lubrication (Crucial): TPE is a highly porous and sensitive material. You must only use water-based lubricant (lube) on yourself, the inside, and the outside of the sleeve. Using silicone-based lubricants, Vaseline, massage oils, or hand lotions will cause an irreversible chemical reaction that melts, breaks down, and permanently ruins the TPE.

  • Pacing and Communication: Because the solid 3-inch tip extension cannot physically feel sensation, the wearer must be mindful of the angle and pressure during penetration. Communicate closely with your partner to ensure the extra length and girth are comfortable for them.

  • Time Limits for the “Mighty” (Ball Loop Model): Because the ball loop acts as a constriction ring, do not wear the Mighty extension for more than 20 to 30 minutes at a time. If you experience any pain, numbness, or severe discolouration, remove it immediately.

4. Cleaning, Maintenance, and Storage

TPE requires a specific aftercare routine to keep it hygienic, smooth, and to prevent the material from degrading over time.

  • Cleaning: Immediately after use, flush the inside of the sleeve thoroughly with warm water and an unperfumed anti-bacterial soap. Ensure any fluids or lubricants are completely washed away from the internal chamber.

  • Drying: Shake out excess water. Stand the sleeve upright or prop it open in a well-ventilated area and allow it to air dry completely for at least 24 hours. Do not use direct heat sources like hair dryers or radiators, as extreme heat can melt TPE.

  • Renewing the Material: Once the extension is 100% dry, you will notice the surface feels sticky or tacky. This is a completely normal property of TPE. Dust the inside and outside lightly with a specialised toy renewing powder or unscented cornflour to absorb the stickiness and restore its smooth, velvety texture.

  • Storage: Store your extensions in a cool, dry place away from direct sunlight. To prevent chemical reactions and melting, never store TPE toys touching other sex toys (especially those made of silicone, PVC, or other TPE/TPR items). Keep each sleeve in its original packaging or a dedicated cloth pouch.

Important Safety Warnings for Your Loving Joy 3-Inch Penis Extension Range

To ensure a safe, comfortable, and enhancing experience with your Loving Joy Penis Extension (whether you are using the Mighty 3-Inch with Ball Loop or the Extra 3-Inch Sleeve), please read and strictly adhere to the following safety guidelines. Because both sleeves are made from TPE (Thermoplastic Elastomer), they share identical material care requirements, but their specific tightening designs require distinct physical precautions.

1. Tightness and Circulation Limits (The 30-Minute Rule)

  • Strict Time Limit: Never wear either extension sleeve for longer than 30 minutes at a time. By design, penis sleeves and ball loops restrict blood flow which can increase firmness and stamina. Leaving the product on for longer than 30 minutes starves the delicate penile and testicular tissue of fresh oxygen, which can cause permanent nerve damage, tissue bruising, erectile dysfunction, or priapism (a dangerous, prolonged erection requiring emergency medical care).

  • Remove Immediately If: If you or your partner notice any extreme bruising, coldness to the touch, deep purple/blue discolouration, or if you experience throbbing, sudden pain, or a complete loss of sensation, remove the sleeve immediately.

  • Do Not Sleep: Never fall asleep while wearing this product. If you lose consciousness while blood flow is restricted, the results can be catastrophic.

2. Sleeve-Specific Anatomy & Sizing

  • Mighty 3-Inch (with Ball Loop): The ball loop is engineered to stretch over your scrotum to anchor the extension securely in place. Scrotal skin is incredibly thin, elastic, and easily pinched. Use plenty of water-based lubricant to slide the loop smoothly into position without pulling pubic hairs or trapping skin. Never force the loop if your testicles feel dangerously squeezed or crushed.

  • Extra 3-Inch (Standard Sleeve): This model relies on a snug fit around the shaft. Ensure the sleeve does not roll or bunch up at the base of the penis, as this can create a dangerously tight constriction ring.

  • Erection Changes: Genital tissue naturally changes size and swells during use. A sleeve or loop that feels comfortably snug at first can quickly become uncomfortably tight as blood pools. Regularly check your comfort level.

3. Lubricant Compatibility (Crucial for TPE)

  • Water-Based Only: You must strictly use a generous amount of high-quality water-based lubricant inside the sleeve and on your body to aid application, comfort, and removal.

  • Never Use Silicone or Oil: Do not use silicone-based or oil-based lubricants (such as Vaseline, baby oil, or body lotions) under any circumstances. These will chemically react with the soft TPE material, causing the extension to break down, melt, warp, or become permanently sticky and completely unusable.

4. Cleaning, Drying, and Powdering

  • Meticulous Cleaning: Wash the extension thoroughly immediately after every single use. Flush the inside canal and the ball loop with warm water and a mild, unscented antibacterial soap or a purpose-made adult toy cleaner.

  • Do Not Boil: Never attempt to sterilise TPE by boiling it, using extremely hot water, or putting it in the dishwasher. Extreme heat will permanently melt, discolour, and deform the soft material.

  • Renewing the Texture: TPE naturally becomes tacky or sticky after washing and drying. Once the sleeve is completely air-dried inside and out, lightly dust the entire surface with cornflour (cornstarch) or a specialised toy renewing powder to restore its smooth, velvety feel.

5. Safe Storage

  • Keep Separated (Critical): Never store TPE extensions touching each other or touching other silicone, TPR, or PVC toys. The mixed materials will undergo a chemical reaction and permanently melt into a fused mess. Store your extension back in its original packaging, wrapped in a lint-free cloth, or inside a separate breathable cloth pouch (like cotton).

  • Environment: Store in a cool, dry place away from direct sunlight, central heating radiators, or extreme heat. Keep well out of reach of household pets, as dogs and cats are often attracted to the smell and texture of TPE and may chew or swallow pieces, posing a severe choking hazard.

6. Emergency Removal Protocol

  • Difficulty Removing: If the sleeve or ball loop becomes trapped due to unexpected swelling or an intense erection, do not panic. Apply ice packs or take a cold shower/bath to naturally reduce the erection and shrink the tissue. Use a generous amount of liquid soap, shower gel, or water-based lubricant to carefully slide the product off.

  • Seek Emergency Medical Help: If you cannot remove the extension after trying cold water and lubrication, or if your genitals become intensely painful and discoloured, go immediately to your nearest hospital A&E department.

7. Regular Inspection and Disposal

  • Check for Structural Tears: Before each use, gently stretch the sleeve and the loop to check for hairline cracks, nicks, or small tears. Because these items are under high physical tension when worn, a small tear can cause the TPE to snap violently during use, resulting in painful snapped-skin injuries. Discard the product immediately if any damage is found.

  • Disposal: Dispose of the sleeve responsibly by wrapping it securely in an opaque bag or newspaper and placing it in your general household waste bin (your black bin). TPE intimate items cannot be processed by standard UK council roadside recycling schemes.

Disposal Information

1. Material Identification: These products are made from TPE (Thermoplastic Elastomer). While TPE is a highly flexible, stretchy, and skin-like material, it is not accepted through standard council kerbside recycling schemes alongside your everyday household plastics.

2. Cleaning: Before disposal, ensure the product is thoroughly cleaned. Wash the extension sleeve with warm water and a mild antibacterial soap or a specialised toy cleaner, and allow it to air dry completely. (Please note: Unlike silicone, TPE should never be boiled, as extreme heat will melt and permanently damage the material). Proper cleaning maintains hygiene and prevents the contamination of waste streams.

3. Disposal:

  • General Waste: Because local councils do not accept TPE for recycling, you will need to dispose of the extension sleeve in your general household waste bin (usually your black bin). Ensure it is securely wrapped in an opaque bag or newspaper to maintain your privacy and prevent any exposure.

  • Specialised Recycling: Check if there are any dedicated adult toy recycling programmes available. Certain sex-positive retailers and eco-conscious brands offer take-back or mail-in schemes specifically for recycling intimate TPE items, which is the most eco-friendly option if available.

4. Packaging:

  • Cardboard Box: If the product came in an outer cardboard box or sleeve, this can be recycled with your regular council paper and cardboard collection.

  • Internal Packaging: Any internal plastic bags, blister trays, or protective wraps should be checked for recycling symbols. If your local council accepts them, place them in your plastics recycling bin; otherwise, dispose of them in your general waste.

5. Environmental Considerations: Always aim to minimise waste by considering the environmental impact. Due to the highly intimate and porous nature of TPE, donating or reselling these products is strictly prohibited for health, safety, and hygiene reasons. Therefore, utilising a specialised adult toy recycling programme (if available) or ensuring they go into your general household waste securely wrapped is the safest and most responsible route.

By following these instructions, you can help ensure that your Loving Joy Penis Extension is disposed of responsibly, minimising its environmental impact.

Disclaimer: All products placed on the market by Loving Joy Limited prior to December 13, 2024, remain marketable as they are governed by the provisions of the previous legislation.