Rev Pistol Grip Penis Pump with Pressure Gauge

Name: Rev-Pump Gauge Pistol Grip Penis Pump

SKU: N11884

Barcode: 5060211964930

UK Responsible Person: Loving Joy Limited

Address: Adur Business Centre, Little High Street
Shoreham-By-Sea, West Sussex, BN43 5EG

Contact: [email protected]

EU Responsible Person: Net1on1 Wholesale B.V. i.o

Address: Atoomweg 63, 3542 AA, Utrecht, Nederland

Contact: [email protected]

Instructions for Use

This model features a premium upgrade: an integrated pressure gauge on the pistol grip handle, allowing you to monitor the exact level of vacuum suction safely and precisely. The 22cm clear cylinder is crafted from durable ABS plastic, and it is fitted with a soft, flexible TPE/silicone comfort donut ring to create an airtight seal.

1. Preparation and Hygiene

Before using your pump for the first time and before every subsequent use, it must be fully cleaned to ensure safe, hygienic play.

  • Disassemble: Gently slide the flexible TPE/silicone comfort ring off the lip of the ABS cylinder. Unclip the air hose from the top of the cylinder cap.

  • Cleaning: Wash the clear ABS cylinder and the comfort ring thoroughly with warm water and an unperfumed anti-bacterial soap, or a specialised sex toy cleaner. Wipe down the hose, trigger handle, and the pressure gauge with a damp cloth. Do not submerge the gauge mechanism or hose in water, as trapped moisture inside the air line can damage the gauge or cause internal mould.

  • Drying: Allow all components to air dry completely or pat them dry with a lint-free towel before reassembling.

2. How to Use

This pump maximises size and rigidity by creating a vacuum inside the cylinder, drawing blood flow into the penile tissue. For the best results, use the pump while flaccid or semi-erect.

  1. Reassemble: Push the air hose firmly onto the cylinder cap and slide the comfort ring back over the open end of the tube, ensuring a smooth, airtight fit.

  2. Apply Lubrication: Apply a generous amount of water-based lubricant directly to your penis and around the inner rim of the flexible comfort ring. This reduces friction and is essential for creating a tight seal against your pubic bone.

  3. Insertion: Guide your penis into the cylinder, pressing the comfort ring firmly and flatly against your body wall to ensure no air can escape.

  4. Pump with Precision: Repeatedly squeeze the ergonomic pistol-grip trigger handle to draw air out. As you pump, keep a close eye on the pressure gauge. This allows you to monitor the vacuum level accurately. Pump until you feel a firm stretching sensation, but stop immediately if you feel any pain or extreme discomfort.

  5. Quick-Release: When your session is finished, press the built-in quick-release purge valve located on the pistol grip assembly. The air will instantly hiss back inside the tube, releasing the vacuum suction so you can safely slide the cylinder off.

3. Safe Usage Guidelines

  • Lubrication (Crucial): Because the flexible comfort ring contains TPE, you must only use high-quality water-based lubricant. Avoid silicone-based lubricants, Vaseline, or body lotions, as they will cause a permanent chemical reaction that melts and degrades the TPE material.

  • The 15-Minute Rule: To prevent injury or tissue damage, never keep your penis under vacuum for more than 15 minutes per session.

  • Use the Gauge Logically: Use the pressure gauge to establish your comfort zone. If you are training for stamina or enlargement, it is safer to pump in short intervals (e.g., 5 minutes of suction, release via the quick-release button for 1 minute, then repeat 2–3 times). Over-pumping too quickly will cause uncomfortable swelling or temporary fluid blisters (oedema).

  • Instant Removal: If you notice any bruising, purple discolouration, sharp pain, or tiny red spots (petechiae), hit the quick-release feature and remove the pump immediately.

4. Cleaning and Storage

  • Post-Use Maintenance: Always wash the cylinder and comfort ring immediately after use to remove body oils and residual lubricant.

  • Storage: Store the pump in a cool, dry place away from direct sunlight.

  • Preventing Damage: Because the comfort ring contains TPE and silicone, ensure it does not touch other sex toys in your storage drawer. Keep the pump kit inside its original box or a dedicated cloth pouch to prevent the flexible ring from chemically reacting and melting against other items.

Important Safety Warnings for Your Rev-Pump Gauge Pistol Grip Penis Pump

To ensure a safe, comfortable, and vacuum-enhancing experience with your Rev-Pump Gauge Pistol Grip Penis Pump, please read and strictly adhere to the following safety guidelines. Because this model features an integrated vacuum gauge and a powerful pistol grip handle, you have precise visual control over the negative pressure, making responsible monitoring vital to prevent injury.

1. Pressure, Time Limits, and Using the Gauge (The 15-Minute Rule)

  • Strict Time Limit: Never pump for longer than 15 minutes per session. Exceeding this limit completely deprives the tissue of fresh oxygenated blood, which can lead to permanent nerve damage, severe bruising, or tissue death.

  • Monitor the Gauge: The built-in vacuum gauge is your primary safety tool. Pump slowly and in short intervals, allowing 2 to 3 minutes between pressure increases. Never pump into the “red zone” or past a pressure level that causes discomfort. Higher pressure does not mean better results; it only increases the risk of injury.

  • The Quick-Release Trigger: Keep your finger near the quick-release safety valve/trigger on the pistol grip. If the gauge climbs too quickly, or if you experience any sudden pain, sharp throbbing, skin pinching, or extreme discomfort, depress the release valve immediately to vent the vacuum.

2. Monitoring Injury and Circulation Signs

  • Watch for Petechiae and Blisters: Pumping too hard, too quickly, or ignoring a high gauge reading can rupture the tiny capillaries beneath the skin. This causes petechiae (small, painful red or purple bruise spots) or fluid-filled water blisters. If these appear, stop pumping immediately and allow several days for the tissue to fully heal.

  • Numbness Warning: If your penis becomes completely numb, cold to the touch, or turns a distinct blue/purple colour, vent the pressure instantly.

3. Material Coordination & Lubricant Compatibility

  • Water-Based Only: You must apply a generous amount of high-quality water-based lubricant to your penis and the inner rim of the TPE/silicone comfort sleeve before insertion. This creates an airtight seal and prevents the skin from friction-burning against the cylinder.

  • Avoid Silicone and Oil: Because the comfort sleeve and components are made from TPE and silicone, never use silicone-based or oil-based lubricants (such as Vaseline, baby oil, or lotions). These will chemically react with the sleeve, causing it to warp, melt, dissolve, or become permanently sticky and completely unusable.

4. Anatomical Safety and Shaving

  • Pubic Hair Warning: Long pubic hair can break the vacuum seal or get painfully sucked into the cylinder and caught under the comfort sleeve. Trim or shave the base of the penis to ensure a smooth, airtight fit and a pain-free removal.

  • Testicle Protection: Ensure only the shaft of the penis enters the cylinder. Never allow your testicles to be pulled into the pump, as the intense vacuum pressure can cause severe testicular injury or trauma.

5. Cleaning and Maintenance

  • Disassemble for Cleaning: After every use, pull the flexible TPE/silicone comfort sleeve off the rigid ABS plastic cylinder.

  • Washing: Wash the cylinder and sleeve thoroughly with warm water and an unscented, mild antibacterial soap or a purpose-made toy cleaner.

  • Protect the Gauge and Pump Hose: Keep the pistol grip handle, the mechanical vacuum gauge, and the internal air hose away from direct water immersion. If water gets inside the gauge mechanism or pump lines, it will ruin the calibration and trap stagnant moisture inside. Wipe the handle down with a damp antibacterial cloth instead.

  • Drying and Powdering: Allow the components to air-dry completely. Because the TPE sleeve can naturally become tacky after washing, lightly dust it with cornflour (cornstarch) or a specialised toy renewing powder once dry to restore its smooth, velvety texture. Never use boiling water, as it will melt the TPE and crack the rigid ABS cylinder.

6. Safe Storage

  • Keep Separated (Critical): Never store the TPE/silicone sleeve touching other silicone, TPE, or PVC items. The materials will chemically react and permanently fuse together. Store the pump disassembled in its original packaging or inside a separate, breathable cloth pouch.

  • Environment: Store in a cool, dry place away from direct sunlight, central heating radiators, or extreme heat. Keep out of reach of children and household pets.

7. Regular Inspection and Disposal

  • Check for Cylinder Cracks: Before each use, inspect the rigid ABS plastic cylinder for any hairline cracks or chips. Under heavy vacuum pressure, a cracked cylinder can implode violently, causing severe lacerations or injury. If any structural cracks are found, discard the item immediately.

  • Disposal: Place the components securely wrapped in an opaque bag or newspaper inside your general household waste bin (your black bin). Because this is a highly complex, hybrid item composed of rigid ABS plastic, a mechanical metal/plastic gauge, flexible TPE/silicone, and internal valve springs, it cannot be recycled via standard UK roadside council recycling schemes.

By adhering to these comprehensive safety warnings and utilising the integrated gauge responsibly, you can safely enjoy the amplification benefits of your Rev-Pump Pistol Grip Penis Pump.

Disposal Information

1. Material Identification: This performance pump is constructed from three distinct materials. The clear, rigid vacuum cylinder and the structural pistol-grip handle mechanism are made from hard ABS (Acrylonitrile Butadiene Styrene) plastic. The flexible connecting hose, internal air valves, and parts of the pressure gauge mechanism typically use silicone, while the soft, stretchy doughnut seal at the base of the cylinder is made from TPE (Thermoplastic Elastomer).

2. Cleaning & Disassembly:

  • Cleaning: Before disposal, ensure the device is thoroughly cleaned. Disassemble the parts and wash the ABS cylinder, the flexible hose, and the TPE doughnut sleeve with warm water and a mild antibacterial soap or specialised toy cleaner. Allow all components to air dry completely.

  • Disassembly: To ensure the most eco-friendly disposal, you must separate the materials. Pull the soft TPE doughnut ring off the base of the cylinder. Disconnect the flexible silicone hose from both the cylinder and the pistol grip handle.

3. Disposal:

  • ABS Plastic (Cylinder & Pistol Grip Handle): Hard ABS plastic and the components of the pressure gauge are not accepted in standard council kerbside recycling bins. You will need to take the separated cylinder and handle mechanism to your local Household Waste Recycling Centre (HWRC) to see if they have a dedicated “rigid/hard plastics” skip. If they do not, dispose of them in your general household waste bin.

  • TPE and Silicone Components (Doughnut Sleeve & Hose): Neither TPE nor silicone is accepted through standard council recycling schemes. These parts must be disposed of in your general household waste bin (usually your black bin). For privacy, ensure all components are securely wrapped in an opaque bag or newspaper before throwing them away.

  • Specialised Recycling: Check if there are any specialised adult toy recycling programmes in the UK. Certain sex-positive retailers offer mail-in take-back schemes for intimate items, which may accept the TPE and silicone parts.

4. Packaging:

  • Cardboard Box: The outer cardboard packaging can easily be recycled with your regular council paper and cardboard collection.

  • Internal Packaging: Any internal plastic bags or structural inserts should be checked for recycling symbols. If accepted by your local council, place them in your plastics recycling bin; otherwise, dispose of them in your general waste.

5. Environmental Considerations: Always aim to minimise waste by considering the environmental impact. Due to the intimate nature of this product, donating or reselling it is strictly prohibited for health and hygiene reasons. Taking the time to properly clean and disassemble the pump ensures that the different material streams are separated safely, minimising the overall environmental impact.

By following these instructions, you can help ensure that your Rev-Pump Gauge Pistol Grip Penis Pump is disposed of responsibly, minimising its environmental impact.

Disclaimer: All products placed on the market by Loving Joy Limited prior to December 13, 2024, remain marketable as they are governed by the provisions of the previous legislation.